Tuck stitch/ combination fabrics

Work in progress

I am presently attempting to knit my samples using a 910 with an EMS kit ayab interface. When possible I will provide punchcard and electronic repeats, and an Ayab repeat for each.

White squares in first chart represent tuck stitches, the dark blue row, the pass that knits every stitch, the lighter blue the pass that knits and in turn drops every stitch. The main knitting is happening on the top bed. Loops and dropped stitches are formed on the ribber. This pattern is not suitable for use with color changer, since patterning for each of the 2 repeat segments occurs over an odd number of rows (7 each, for a repeat total of 14). Punchcard knitters repeat X 3 in height, electronic knitters use only one of the 2 repeats, outlined in red.
Preselect first row of pattern from either side on a punchcard machine or an unaltered 910, from left if using ayab.
*With the KC set to tuck <– –>, the ribber set to slip <–  –> knit 6 rows. The last row will be all knit (darker blue).  Cancel slip on the ribber carriage, setting it to knit  <– –>
knit one row on both beds to the opposite side (lighter blue, preselection will happen for the first tuck row in the next sequence). Disengage the ribber carriage still set to knit from the KC, take it across the ribber bed to release the loops. Reset the ribber carriage to slip <—->
move carriage back to reconnect with the KC. ** Tuck sequence begins again. Repeat  * to ** ayab repeat for 30 stitch swatch, requires color invert same repeat, not requiring color invert after loading into softwaretuck fabrics are usually more interesting on their purl side