Making a 2 color drop stitch “work”

I usually try to leave opinions out of my shares, but this post includes some along with “don’t do what I did” tips.
This was a pattern available for sale decades ago, sold directly to customers. At frequent intervals over time questions come up in forums as to possible DIY techniques and methods of design and execution to create the knit, or similar, followed by speculation.
The images from the ads online are small. Trying for a bit more detail, there is a see/peek-through quality. At first, I thought it might be a version of the stitch using 3 colors, but later, looking again, I came to believe it to be a 2 color drop stitch fabric with a dark constant motif color creating the donut-shaped designs with changes to three different colors in the background.
I am planning to execute the fabric as a modified end release, releasing stitches at intervals based on needle selection.
First flub: I was thinking of this as an addition to a prior post, and I got happy cleaning up and deleting stuff. Getting here I realized some of that stuff had to do with the original repeat used and the gimp layer images illustrating the steps used to obtain my repeat.
It is possible when that happens to reverse construct the images. That brought me back to this image, 20X16, drawn as less of a circle since the fabric technique will lengthen the design. It is scaled double length to 20X32 for processing in layersThough the image is far too small to help define the quality of the stripes between the circles, the goal here is to include areas of solid stripes in drop stitch in the alternating colors between the shapes. All white pixel rows will not create long stitches on the top bed, only all knit rows only on the ribber, not the intended fabric.  

The tiled repeat: I wanted to add solid color drop-stitch stripes, the solution being to add all black rows. Every needle will select every row in those areas, colors are changed every two rows, creating the desired effect when the corresponding stitches are dropped.
On any row where every needle is preselected, all needles can be pushed forward to E position dropping the whole row of stitches, and needles are pushed forward to E again after the release so that the second row of loops composing the stripe will be created on the top bed on the next pass to the opposite side.
My final png planned as a single motif test on the 930 is modified to 46 stitches by 72 rows. Imagining the 2 colorwork in repeat, estimating if the pattern and ground fall in the proper place A visual summary with an added color change column and row numbers with rows on which dropping all loops can occur marked with different color numbers. In this case, the ground is in the dark color, the shape in the lighter one. Determining whether the shape or the ground stripes knit the dark color is simply done by beginning the first all knit rows with the dark color or the light.
Getting to the knitting: the yarn I am using, knit at tension 4/5, is significantly thicker than that recommended in the ad for the pattern.
When every needle knits every stitch on either bed, adjustments need to be made in tensions used approaching that used for the yarn when knitting stocking stitch single bed. Brother ribbers also tend to knit tighter than the top bed.
When working every needle rib with sporadic needle selection on the top bed, it takes a bit of testing to find the ideal tension so that stitches are formed and knit off properly on either/both beds.
When lots of needles are being knit on the top bed, the carriages are likely to become harder to push.
A far thinner yarn would change the scale of the overall design even if using the same repeat.
The first swatch encountered aargh moments.
A: the color changer was frequently trying to share 2 colors at once. When I attempted to change the design color, the yarn got caught around a gate peg at the start of the row, and the knitting dropped to the floor.
B: testing reversing the colors. When the dark color was switched to red, C, the contrast and definition of the newly forming “circle” was not enough to my taste. Giving it another go, the theory worked, the details in the fabric underneath the swatch can be seen peeking through,  but I would like to have stripes in the solid lighter colors as opposed to 2, and more space between the shapes. A new, untested draft is now 50X76  but those rows for the solid colors need to be rendered again with black pixels. Here some of the peek-through quality of the fabric is shown again. When any fabric is gathered sideways, it is likely the repeat will appear narrower and longer. Using a 16/2 cotton at nearly the same tension produces a fabric that is even sheerer. And now those solid stripes in 2 rows knit are really bothering me, thinking they should be switched to only one row of loops, making the original repeat without those added black rows the better repeat? Only one of the two colors would pick up loops, with the second knitting 2 rows on the ribber only.  Aaargh! So what of this? Different day, yarns used before, same tensions, a very different result. The colors look different because the sun is finally out and this photo is taken in natural light as opposed to weird artificial lighting. The navy color is slightly thicker than the white, the single dropped row is not immediately visible. Stitches were dropped on any rows after all needles flatlined, and they were returned to B position prior to the next carriage pass.
Lo and behold the joyful experience of having yarn break when the stitches are pulled in order to drop them!  A potential use is for the thinner knit is for it to be used as a layer over a different pattern or the same design as seen here, in the thicker yarn I have never been a fan of this fabric, and for a while.
To my eye, all over geometrics rather than floating forms on solid ground are more attractive, one such sample: seeking a rounder, smaller donut shape: The red is a thicker yarn than the pale yellow, the fabric had an interesting slight curl evocative of shadow pleats. Other possible changes include the elimination of the top and bottom row in the original design. What seems a possible easy fix is not. The above repeat knit creates an elliptical shape rather than a circular one A more stable fabric with areas of stitches dropped for a single row in each of the alternating colors. How to for both are found in the post.
I need a break from long stitches for a while, though this is yodeling. Never say never.  It takes time and effort to develop any fabric to the point where it is considered a satisfactory one, let alone to write and publish accurate patterns using the technique. People who do both deserve to be paid for their time and effort, and are due respect, so no sharing if the pattern is copyrighted or is an original one available for sale presently online is proper.
That said, techniques or merely repeats are not subject to the same “restrictions” and certainly may be adapted for use in different, more personal, or new ways. If an item like a scarf is made using a particular needle arrangement and texture and someone else makes a dress using the same stitch type but shaping pieces, adding details, pattern instructions, the scarf maker, IMO, cannot really claim their work has been copied.
To my mind, credits when sharing anything if available are a matter of courtesy.

Another garment illustrated in the FB comments on the last search query for the Dowse pattern or similar fabric was created with FI shadow pleats. Shadow pleats rely on the contrast between thick and thin yarns to create folds. The double density in the traditional FI segments and the subsequent shift to using thinner yarn for the second color still have floats on the purl side of the knit and are unlikely to produce a sheer knit.

To mesh or not to mesh 9: more on mock filet design

Previous posts with some related information:
A lace mesh series: using GIMP  8/17
To mesh or not to mesh 1  5/11
To mesh or not to mesh 2  5/11
To mesh or not to mesh 3  5/11
To mesh or not to mesh 4 5/11
To mesh or not to mesh 5 7/17 a collection of mesh design repeats
To mesh or not to mesh 6: chevrons 6/20
Lace knitting tips, to mesh or not to mesh 7  7/20
To mesh or not to mesh 8: more Numbers meet Gimp 5/21
Unconventional uses for punchcards 2: thread lace cards for “filet” mesh  8/17
It is hard for me to imagine a decade or more has passed since I began to blog. My approach to post content has evolved since then as has my shifting familiarity and use of software programs. Periodically topics resurface to my attention. Lace is one that crops up every few years, resurged after my purchase of Dak and my experiments with testing the lace module, and has persisted, so here I am once more looking at superimposing shapes onto a preferred mesh repeat.
There are always multiple ways to achieve a goal. Punchcard knitters are not excluded from the processes and without spreadsheets, similar planning may be executed on graph paper using colored pencils.
My go-tos now for planning out my charts on a new iMac with M1 chip and OS12 are
Mac Numbers 11.2
Gimp 2.10.24, Rosetta required
ArahPaint 6.0
img2track for download to a 930 to knit swatches, presently from a Windows 10 PC
InSync for file sharing between the Mac and the PC

The final repeats created with any of these methods need to be checked or edited to make certain they observe the rules for placement of punched holes or cells on proper rows for the specific brand and model knitting machine being used.
If the aspect ratio is particularly important, then more cautious planning may be needed.
For an indeterminate reason, the shape for superimposing on a mesh in these experiments is a heart, plotted out here in Gimp for use in a 24 stitch wide limit repeat. It is good to begin on a canvas longer than the estimated motif, magnification to 800-1800X with a 1X1grid and snap to grid make the execution and filling in of small-scale designs easy to plan and view.
In terms of drawing tools, the bucket-fill paint tool may be set to fill with the foreground color, background color, or pattern. The pencil tool normally uses the foreground color. If switching between the two tools, remember to choose the proper tool before continuing to edit repeats.
The heart was plotted out and cropped to 21 stitches by 15 rows, on a 24 stitch grid, and the image was saved, it is deliberately planned for an odd number of rows in width and height.  My chosen lace mesh repeat is 2 stitches by 6 rows. Planning a base mesh in Gimp with the above repeat saved as a pattern and used to bucket fill the canvas: The overall mesh repeat png is saved. Blank areas in every third row in the first and every third row will be skipping transfers in those areas and knitting the stitches composing the shape. The heart shape itself needs to be superimposed onto the mesh base. It is relatively small, with increases and decreases forming it easy to follow, so in the simplest method, red squares for each pattern row are filled in on the grid transfer rows, using the single-pixel pencil tool and working in RGB mode. If satisfied with the placement of the shape, use bucket-fill set to ground or foreground to eliminate red cells by filling them with white, and the mesh design is ready. If working with a card, punch black cells only. This placement is tested and kept in mind in other explorations. Using a spreadsheet: the same sort of chart may easily be created quickly in Numbers. In this instance, my table is still planned for 24 stitches in width, but 54 rows in height. An extra column is added and used on the far left to mark rows to be hidden. Beginning at the bottom left two rows were filled in a different color, the third row is left blank, all 3 cells are selected. When multiple cells are selected, depending on which side of the selection box one hovers over with the mouse, a yellow dot/  handle will appear. The tool acts on the selection. Clicking on it and dragging it with the mouse will, in this instance, repeat the selection until the mouse is released. This may be done in any direction and quickly fills in whole tables. It is not necessary to perform this extra step before hiding rows, but I find having that extra color makes it easier visually, especially when working on long repeats. It also makes for easy return to selection if hiding rows is done in shifts.
Beginning at the top of the table, holding down the command key, select rows marked with yellow cells, in this version of Numbers, table row numbers are green rather than blue,   continue to the bottom of the chart, and under the Table menu, choose to hide 36 rows. With rows hidden the mesh repeat shrinks from 6 rows to 2. A new 4 cell table is created. The 4 interior cells were chosen, copied, and pasted in the lower-left corner of the reduced height table. Once pasted, selecting the repeat again will allow one to use those yellow handles to fill the contents first toward the top, then to the right. The image on the left shows the results, with only the numbers for the unhidden rows shown on the left. In turn, the heart was the pencil tool to draw it using a third color in the chosen location. The unhiding rows function produces the expanded repeat with all knit stitches in red on the mesh grid ground. The column with the yellow cells is deleted before converting the Numbers repeat to an electronic or punchcard, the how-to discussed in other posts. Comparing the hand-drawn heart in Gimp alone on the left, to the spreadsheet results on the right, there appears to be a difference in the starting rows, and in only one other row, two black cells appear that can easily be altered in either repeat. Brother machine knitters would need to shift those 2 blank rows at the bottom of the repeat on the right to its top or to to start lace patterning on row 3.  Keep in mind that lace patterns in particular, with their infrequent markings, even in color reverse, grabbed from a spreadsheet and scaled in Gimp to final repeat size, often require a lot of “clean up. This repeat, intended for use in another post shows the difference between these 2 different programs once more. Superimposing shapes onto the same mesh requires that they be elongated X3. Gimp does not do this well, while ArahPaint does so elegantly. The result using Gimp, with the image Mode converted to 2 colors indexed and scaled in height X3 is shown on the left with marked error areas. The Arah YX3 result on the right is correct, created, and saved More choices exist, continuing to place the heart 3 rows up from the bottom, and not using multiple layers. For the heart to be pasted in place on the mesh, its white background needs to be made clear/ transparent. That is achieved by using Layer, Transparency, Color to Alpha, The layer-to-alpha image may be saved as a png with transparent background for any future use.
Work using 2 windows, A simple copy and paste will fix the image in an arbitrary location. Instead, click on the rectangle select tool, selecting and copying the heart image, paste it on the ground in the second window, where it remains as a floating selection that can be dragged to the desired location and is not anchored until the mouse is released. This may be undone and repeated multiple times.  A, copied and pasted in place on the ground, B, resulting in C
Even easier, working with the full-color, white ground heart repeat placed 3 rows up from the bottom, Aset red as the foreground colorand then use the bucket fill tool B to fill its ground with the mesh pattern, seen in C
Comparing the all in Gimp Drawing to either of the last 2 patterns, two differences appear, an extra row of transfers before removing transfer stitches to start the heart shape, and those 2 extra black pixels/eyelets Committing to the first design, 24X60, Proof of concept for the single repeat: Tiling the repeat before knitting helps one visualize secondary shapes that will be formed by it, here those pairs of extra dots are removed in areas marked with red lines, helping to make the decision about keeping them or not Developing brick repeats or half drop is possible with offset and brushes in Gimp, but, to my mind, easier in Arah. Using the Arah drawing in repeat, the design is now 24 stitches wide by 120 rows high in a brick arrangement offset by 12 stitches. The same heart, in half drop repeat, offset by 30 rows, now double wide, 48X60, suitable only for an electronic machine Changing the background grid for other stitch types: the heart is rescaled for use by 2 or 4 times in height. Again, the differences between Gimp’s incorrect scaling, A, and the Arah drawing in repeat, B The differences between the clear ground heart image dragged and dropped onto the new background or navigating between 2 windows and using the rectangle tool as described to copy and paste. Possible applications This begs the question of working on larger images. For use on a lace mesh, simpler designs apart from overall size are best, but if a mesh base is not your favorite fabric or goal, tuck, slip stitch, thread lace or even fair isle patterns may be created with more overall flexibility, using the same principles on backgrounds.
Thread lace, depending on the yarns and tension used, can provide the illusion of eyelets behind images of any size. The steps: image to alpha selected and pasted onto the ground, color reversed The final png is 129 stitches wide by 172 rows high This is the first attempt at a partial repeat test proof of concept. I have been telling people serger monofilament withstands ironing and light pressing, and periodically I test advice I have given formerly. To start with, the darn monofilament, which I even used in double bed garments, but nearly 2 decades ago, refused to feed properly or at all. Because it is nearly invisible, my knitting started with it pulling too tight, and I wiped out 12 needles out of 72 in different places on the needle bed in a single carriage pass. Determined, I sorted how to hand feed it, got the rhythm, complete a swatch. A marks an error I made in loading the second track in img2track, resulting in an added, wrong pattern row. The holes, B, C, and D were nonexistent until I tried flattening the fabric a bit with an iron, and the monofilament simply melted in various places. Other observations: there is some bubbling in the all knit areas. With ironing, that effect was lost and the areas with more mock holes widened as can be seen at the side edges. In thread lace, the end needle selection is canceled so as to have the paired yarns knit the end stitch, but pattern needles can still be selected, so if end needles are forward in pattern, it is best to push them back to B position by hand. One way to eliminate having to do that, which also reduces knitting time, is to create vertical all-white lines on either side, as in this version of the repeat now 144 X 200 pixels. I had interesting issues with having needle selection visually appear correct throughout, and the pattern itself appearing correct when checked at 1800 magnification. While the smaller sample was accurate until the filament began to melt, here I had 2 needles not knitting the yarns alternately but together, and an odd change in the center that looks as though yarn selection in those areas was reversed. The thicker yarn here is cotton, the thinner rayon. Troubleshooting is required. Unplanned tucking is a sign of damaged needles, but because the second yarn used herd is so thin, the effect was not obvious until the vertical pattern in the same area on the bed became apparent.
I am using a punchcard carriage on an orphaned 930 for the thread lace, and have not knit on more than 90 center needles in the past. Some days both operator and machine need a break. The cam buttons and undercarriage were oiled.  The first selection tests involved programming this as an all-over design. When only using part of the needle bed in a pattern, the center of the needle bed needs to be cleared by the knit carriage for the pattern selections to advance and knit properly. Doing so on part of each side of the center in thread lace and changing the culprit needles eliminated those single stitch issues. Before committing to a large width of fabric in thread lace, perhaps a practical, visible, and easy place to start for checking patterning and needle selection is to knit the ground in this pattern as a fair isle pattern before proceeding with the intended large-scale design. The finished test swatch: because of the disparity between the number of all knit stitches vs patterned ones where one of the colors is slipped on every pattern row for every other stitch, the fabric shrinks dramatically when off the machine. The knit areas pop out a bit, and a lengthwise tug makes enhances the effect  If the goal is a flat fabric panel, then blocking is a necessity. Here the piece is casually pressed, no pins, letters point out issues:
A: knit rows before any pattern selection
B: an attempt to knit stitches with a cast on comb, and no weights, lots of uneven float loops on the reverse
C: changing the amount of weight; if knitting in multiple tracks using img2track, remember to be outside the set mark with the knit carriages before selecting the next pattern row to avoid selection errors
D, E: there are occasional improperly formed tuck stitches
F: “My piece is almost finished, the weights are touching the floor but I have just a few rows left, too lazy to move the weight”, the price: some messy loops on the reverse again to match the start
G: all knit rows again, the latch tool bind off around single gate pegs was a bit snug The mesh effect was noticeable after resting, the piece measures 25 inches in width by 25 inches in height.
When moving weights up, using a ribber cast on comb carefully poked through the knit may cause less snagging and issues than using the single bed cast on comb.
This fabric evolved because of a discussion that began with a knitter who is working on sculptural shapes emerging from textured backgrounds.
I see thread lace as having potential for developing all sorts of blistered, 3D elements that have nothing to do with flowers or wearables and am planning follow-up posts using the technique for texture rather than mock lace. To be rendered usable, this piece would definitely need blocking, maybe even starching in order to be stable enough to hold its shape over time.
I have blocking wires, but over my decades of knitting have maybe used them twice, my blocking has been far more casual.

Friends lately have asked about skulls over thread lace mesh, this is an electronic repeat with room for resizing or border additions, keeping in mind that in thread lace the white areas knit both yarns, the dotted areas create the illusion of holes. The design was initially created working in black and white, with an alpha channel added a new file was opened, bucket-filled with the ground 2X2 pattern, the above was copied and pasted in the chosen position, resulting in this
The 100X92 png which in turn needs to be color reversed for use as a thread lace pattern

My first non repetitive DBJ explorations on 930

I created large-scale nonrepetitive image garments very early in my knitting career using Cochenille Bitknitter and Commodore computers linked to a Passap E6000. Over time my focus changed considerably, with any production knitting moving onto accessories as I began to make items for sale in galleries and in shows, most often single-bed on a Brother 910. If knitting is a primary source of income, one needs to consider production time management, material costs, and what the local market will bear in terms of pricing.
A post, written in 2018, began to explore two-color-dbj-non-repetitive-images-electronic-kms/. At that time I did not have a machine model capable of using img2track.
An orphaned 930 entered my life, and with rare exceptions, over the past few years, my blog sample swatches have been knit using img2track, which I have found easy, and reliable, with any programming errors due to the operator issues including learning the differences from 910 programming and remembering to actually use them.
No matter how long any of us have been knitting, there can be many aaargh moments both in everyday knitting and when exploring new techniques.
I have a supply of lovely 2/48 cash wool in royal blue, black, and grey. Three strands worked predictably on my punchcard machine in a series of my spiky scarves, shown in progress on the machine. Nearly all my previous dbj pieces have been knit on a Passap E6000. The 930 experience for such repeats is new to me. With some help from Tanya Cunnigham in reviewing the steps required when using img2track, I returned to cellular automata repeat saved years ago.
I encountered problems with the triple strands of blue not feeding evenly, here both colors were picked up by the changer accidentally, I realized the issue, trying to unravel the row of knitting produced this That provided an opportunity to decide I preferred the reverse color placement as well as wanting a thicker ply for the white, resulting in twice the fun with 2 colors, and another scrapped sample Switching the white to a single-ply thicker yarn made its stitch formation far more manageable. The blue however seemed to have a single strand of the three with a propensity for catching on gate pegs. I tried tension adjustments, the usual tips in managing static. At about row 1,000 out of 1288 rows, I realized I had an issue with both yarns being caught on gate pegs. In trying to lift the stitches off, the yarn broke but gave no immediate visible clues, the dropped stitches and a lovely hole, as a result, appeared when knitting had progressed far enough below the current knit rows. On the left, the work is shown still on the machine, while on the right, it is off the machine, and in the process of a patch job with a temporary accessory and stitch holder in place. I was able to achieve a reasonable repair on the knit side, but the birdseye pattern on the reverse is a bit scrambled. For folks that are not familiar with electronics and are curious, the 930 has the smallest memory of the later Brother electronic models. My pattern repeat is 74 stitches wide by 644 rows in height. The user manual explains: the KH-930 takes just a few seconds to load the track because the memory holds only 2 KB of data (about 13000 stitches). Later models have a much larger memory (32 KB). The KH-940 and KH-950i require 42 seconds to load a track. The KH-965i and KH-970 load only the requested pattern, so the loading time depends on the size of the pattern. img2track indicates progress as the data is sent to the KM. When the pattern has finished loading, the KM should beep, and show the green READY light and a 1 in the display (for row 1). The program automatically chooses Selector 2 for a single image and centers it. You may change this by using the normal pattern-selecting process on the knitting machine, choosing Selector 1 for all-over patterning, or using Selector 2 and choosing a different location on the needle bed to center the pattern. If your pattern was divided into more than one track, you will have to load successive tracks when completing the previous track, specific instructions are given for programming subsequent tracks. My pattern was broken down into 4 tracks.
The cable used for downloads to the machine is used externally, no alterations to the machine’s hardware are required as when using Ayab on the 910. The pattern is stored in the machine, so the computer needs to be awake only during downloads, not constantly as in programs that use knit-from-screen.
Each track for 2-color DBJ using the KRC built-in separation is entered in numerical order as a new pattern with first-row preselection from the left to the right and the first row knit from right to left toward the color changer. If the repeat is not planned for the number of needles in use, any position or change to the all-over design needs to be re-entered, and the KRC button must also be set again.
Cam button settings are set according to the chosen dbj variations for either or both beds. End needle selection is usually canceled. In some patterns using it can create an interesting beaded edge on either side, which is worth testing on small samples to determine one’s preference.
I like to plan my pieces beginning with the dark color, plan my repeats with the deliberate placement of both colors and any scaling in the pattern BMP prior to download, using Gimp. I also prefer to have color 1 as the dark and color 2 as the light. The default in the Japanese DBJ separation uses the light color, white squares, as color 1. Out of habit I color reverse my images so my first preselected row from right to left can just knit my black squares rather than the white, and I can continue my motifs as I intended while having machine prompts for each color also match.
Pausing knitting is easy as long as the needle selection is not disturbed. Ending with COR avoids any confusion about which color should be used next. Starting outside the set mark, turn the machine back on, and simply continue in the pattern with appropriate color changes.
Tanya Cunningham manages and moderates the membership, settings, and posts for the Img2track – For Machine Knitters group on Facebook.
These were her tips and reminders to me for handling pauses in knitting immediately after the following track in the sequence is first downloaded: let’s say that either some needles got pushed in or repositioned, or for whatever reason, you don’t have certainty that the last row of needle selection is reliable, and you want to “re-select” the last row before you knit it, the last track you knitted should still be in the memory, even though you’ve completed that part of the pattern. 
1. Push all needles back to Pos B. 
2. remove the yarn from the feeder, and disconnect the K carriage from the R carriage. 
3. Turn the Change/Selector knob from KCII to N (NOTE, this will cause your PART buttons to de-select) 
4. press BOTH PART buttons. 
5. Move the K carriage to the right. No needles will knit, since all are in POS B, and both PART buttons are depressed, AND no needles will select, since you’ve moved the change/selector knob to N, and the memo will not record any advancement of row. (However, if you’re using your mechanical row counter, it WILL record a row, and one on the way back so plan to either disable the ribber arm or turn the counter back 2 rows)
6. Now you will have to re-select the last row of needles for the track you’ve most recently knitted. First, verify that KRC is activated. Now, you will have to push the up/down arrow buttons to select the very last row of the pattern which will be an even number, and color 1. Depending on whether the carriage was moved in such a way as to activate the sensor enough to cause the memo to advance, you may be able to simply use the row that’s showing, but even beginning the movement of the carriage may advance it. To be sure, what I do is to advance (in this case to Row 1 Color 1), and then back up one row, using the arrow buttons. 
7. Move your Change/Selector knob to KCII, be sure to move outside the turn mark. Verify KRC; memo says last row, color 1; both PART buttons in. Now, move your carriage right-to-left, to select the last row of the previous track. 
8. Load color 1 in the carriage, load the next track into the machine, KRC selected.
9. Now, as you knit to the right, you will be knitting the last row of the previous track, and selecting needles for the first row of the next track. Carry on.

In terms of generating cellular automata math-based patterns, the Wolfram website is a great place to explore repeats. A player, temporarily unavailable to Mac users is presently available, allows for the download of interactive demos in .cdf format. In terms of knitting any of the repeats, the most suitable appear to be ones that are generated in black and white to start with. Not all are, and at times changing the mode to bitmapped in programs such as Gimp can produce a glitched effect. Though the latter may be interesting and desirable to some, I prefer clean lines and diagonals along with identifiable shifts in the scale of any triangular components.

I am often amazed at the speed with which time passes, previous related posts: 2015/12/09/cellular-automata-charts-for-knitting-etc/
Previously knit repeats 2017/09/11/my-new-knitting-projects/

Weaving drafts may also serve as inspiration for knitting repeats. Posts with related content: 2015/11/28/weaving-drafts-as-inspiration-for-other-textile-techniques/, and 2018/07/02/numbers-to-gimp-to-create-images-for-electronic-download/. These images are extracted from a draft for an advancing twill. One may explore segment placement and color reversals easily using programs such as Gimp. There is also potential for exchanging colors to get a sense of how the pattern might appear in different colorways My planned test repeat is 76 stitches wide by 556 rows high.

Intarsia without an intarsia carriage on Brother machines

I recently have been browsing through some of my machine manuals and found these references on methods for executing simple intarsia patterns, the type I usually associate with holding hand techniques. The knit carriage is used, and the yarn is placed on the floor in front of the machine rather than fed through the yarn mast. These illustrations are from the 892 punchcard manual, the same capability was built into the Knitking 893, and Brother 930-940 electronic models. The related positions on the 892 carriages: If the setting has not been used for long periods of time, the holding cam lever may not move to the desired position. LPS1 platinum-grade spray can be used successfully on stuck buttons and was used on my carriage. It will take a little while for the full release, do not overspray. Following the instructions, the setup row will ready the knit for the usual intarsia techniques.
The stitch location is just behind the latches prior to laying yarn over needle hooks in the initial color positions.More info on traditional intarsia methods  includes how to use the intarsia carriage accessory.  This is from a Japanese language manual for the 891(1987-89) punchcard machine, which appears to introduce the idea of replacing the use of the knit carriage and plaiting feeder with one specifically designed for intarsia

Single bed tuck and slip stitch fabrics 2: adding color

Any tuck repeat may be used in the slip stitch setting. The results for “safe” repeats executed in slip stitch may not be very textural or dramatic.
Though at times presented in color, the same patterns can be very effective in single colors as well.
Prior to testing multicolor patterns, I like to start the work with waste yarn, testing color changes there first, making certain colors are threaded properly, not crossed, and that the color changer is set up properly.
The Brother single bed color changer is unique, in that the yarn remains in the changer, not leaving it with each color change; its manual 
In the absence of a single bed changer, some fabrics may be knit with the ribber up, using the double bed model. This is the only option available for the bulky machine. There is a limit as to the amount of tucking that can be achieved successfully since the ribber arm does not have the system of wheels and brushes that help keep loops and stitches in place single bed.  Manuals

Instructions from the Brother single bed color changer manual 

For Studio/ Silver Reed

Punchcard volume collections are a great place to start to search for published repeats and subsequent DIY inspiration.
One such is Brother volume 5  Since the knit carriage needs to move to and from the left-hand side of the machine with each color change, an even number of rows in each repeating segment is recommended, but not necessarily required. The first preselection row is generally moving from right to left. End needle selection on helps the edge stitches knit. At times end needles will need to be pushed forward to knitting position by hand. Depending on how the repeat is placed on the needle bed, with some experience with a tuck or slip stitch, one can decide whether keeping the end stitches in the pattern creates a better effect at vertical edges. Analyzing 2 random repeats The respective .bmpsAs with all punchcards, the first and last 2 pairs or rows are not part of the design, they are necessary for the punchcard to roll continuously in the drum. Keep in mind that the card is reading design row one while your eye sees the row marked #1 by the factory on the card outside of the machine. Following the suggested color changes to match the specific swatch takes the guesswork out of the equation. In DIY or in trying a different color sequence, such guides may have to be shifted and marked accordingly. Specific color suggestions are given in the samples above in the left-hand columns. In #327 the order is in a variable sequence, which requires a bit more attention than #328. Follow the line below the #1 mark to the left, each card begins with color 1. Color notations in 328 are also next to those 2 all punched rows at the top. That is because those 2 rows overlap the first 2 design rows as the ends of the card are clipped together, front over back, for smooth, continuous, advancing movement. In 327 the sequence at the bottom would need to be hand-marked.
Before tackling patterns with moving components, these charts begin to analyze color changes in a ready punched or self-designed card which produces a honeycomb-like effect. The chart colors used are random picks from the palette, for illustration purposes only, illustrating areas where color changes may occur. The tuck/slip stitch held in the hook of non selected needles gets elongated and comes forward on the knit side, creating vertical lines in the color that is not knitting. The blue highlights the row where a single stitch, single row tuck or slipped stitch is created and the corresponding positions of the yarn on the knit side of the fabric Four tucked rows is probably the limit on Brother machines unless one is working in fine yarns. In the first interpretation, the ground knits for 2 rows on all preselected needles. In the second, the surrounds of the interior striping knit for single rows only at the top and bottom of the repeat. Electronic repeats A and B on the right may be as small as a single 4X12 unit.

The same card may be used, altering the color-changing sequence so the ground that will surround the tuck or slipped stitches changes as well. Using the same card would require a pattern start on card marking row 2, and an initial preselection row from the left to the right Keeping the 4 tuck row maximum the blocks of knit stitches between tucks can be varied, as can the movement of the vertical bars. The card repeat on the left would preselect from the right, while the repeat on the right would preselect from the left. So the card on the right is already punched, and instead of changing the colors outlining the shapes, one wants them constant and with a start from the right? The workaround is to advance the card to the last row in the full repeat, #36, lock the card, and preselect toward the color changer continuing to change colors in 2 then 4-row rotations after releasing the card. Tiling the repeats multiple times as with any pattern helps isolate areas where color changes might work as well as give us a sense of pattern movement across the fabric. With so many tucked rows so close to each other, it is best to use thin yarn. For slightly thicker yarn, one possible “fix” might be to simply eliminate one of the 3 tuck bars across the repeat, again check tiling for any errors, or places for color changes. Here the shift is not completed, some tuck bars were not eliminated the “corrected” repeat without additional rows, some possible color changes can follow the colored chart suggestions Moving on to electronics, playing with symmetry the repeat now becomes 30 stitches wide, the tiled image check for the unaltered version on the left.  The repeated adjusted two different ways in height to accommodate color changes in a few different spots Working with repeats with tuck or slip bars that are only 2 rows high make for easier use of a range of yarn thicknesses. There are some surprises to be found when color changes are made as often as every 2 rows, sometimes using up to 4 colors. The extra all knit rows may be eliminated altogether.
Beginning with a pattern that has large areas of black squares can help one understand what happens to the design as that knit ground takes on color striping in the same frequency as the color changes. The yarn used here is a 3/8 wool, making the fabric a bit stiff. The repeat is a larger cousin of card #327. Before the days of software tiling methods, on way to check repeats was to knit them up as Fair Isle. The large floats in this made it not its best use, the floats were sometimes caught with the companion color or looped. Had the long floats been consistently free, they could have been cut for a fringed look on the purl side and would have held in place well. Tuck knit in a solid color Slip stitch in all variations has purl side edges which curl to a greater degree, the short skipped areas were probably due to too tight tension of too quick a carriage pass to the opposite side tuck alternating two colors every 2 rows slip stitch  2 color variation slip stitch with the addition of a third color in the rotation The associated punchcard: Some patterns using color rotations every two rows are referred to as mosaics, mazes, or floatless fair isle. They can be deliberately designed, but there are treasure troves of working repeats in punchcard pattern books that produce visual cousins and may also knit up as lovely fabric in single colors, and wonderful surprises at times when one designed for single color is striped. A few to try that are pictured with corresponding swatches shown on the knit side:  from volume 5, the grey cells indicate the page numbers that correspond to the thumbnails in the downloadable version from Stitchworld, I have included repeat sizes, grey highlighted ones are suitable for use in punchcard as given Brother yarn changers are numbered, from right to left, and their published card designs color suggestions reflect that. The lace extension rail must be used as the knit carriage needs to clear the color changer on that side in order for the colors to change properly.  The Studio color changer color positions are marked with letters of the alphabet from left to right Some of the Studio punchcard pattern books showed both sides of the expected fabric assi\ociated with each card, here is a repeat that breaks the tuck rule of no more than one blank square side by side in any row.
This swatch pattern from a Japanese magazine illustrates the difference in the formation of the tucked loops when two blank squares exist side by side. The repeat is 10X22, colors are assigned letters rather than numbers here as well Another rule breaker: odd numbers of tucked rows with no added all knit rows. Experimenting with such repeats results in less organized all-over patterns, here colors are changed every 2 rows, every 4 rows A single knit row may be added, for an added variation with color changes every 4 rows These repeats take shapes in another direction which becomes more textural and interesting when blank stitch areas are expanded for use in slip stitch setting This pattern, with color changes every 2 rows and two-row tuck sequences has an assumed interesting pattern shift.  The tiled X2 horizontal repeats lined up side by side show that extra knit stitches have been added, shifting tuck stitch rows by one stitch in alternating directions, but just because it is published, it does not necessarily make the repeat correct. Those striped areas can only occur if there are solid all punched areas.  Keeping the constraints of a 24 stitch repeat, reducing the width of segments to 12 stitches rather than 24, the original repeat as amended The tiled results for each24X56 repeat proof of concept swatch in a far thinner yarn than the book photo An approach to designing such patterns can begin with a template for color changing every 2 rows and taking colored squares away to indicate stitches that will be slipped or tucked. Repeats can be adjusted from wider electronic ones to the 24 stitch width constraint for punchcard machines, as well as shifted to change the resulting shapes and their colors on the knit side. The two-dimensional charts are not capable of reflecting the amount of gathering of the fabrics or distortions of the stripes on the completed knit Japanese magazine publications often recommended many color changes, each for varied numbers of rows. Sometimes more is less. The number of colors may be reduced, and changing the numbers of rows used for each color as well can expand the number of fabrics produced from a single repeat. Good note keeping is a necessity if the intent is to easily reproduce the fabric at a later time.
Mixing things up for vertical designs:  Adapting punchcard designs for use in electronics becomes easier once one is familiar with the stitch structure. This is a cousin of 328, 13 stitches X 52 rows. Tiling as in all designs helps sort out errors or missing pixels. The “corrected” pattern, with the accompanying test swatches, the first knit in tuck stitch changing colors every 4 rows and slip stitch changing colors alternately every 2 rows, then every 4: My blog posts on working with and designing mosaics (suitable for tuck and slip) and mazes (slip stitch only, multiple side by side unpunched holes or white squares in any row), in reverse historical order
2019/06/29/mosaics-and-maze…numbers-and-gimp/
2015/10/21/working-with-gen…-gimp-charting-2/
2015/10/03/working-with-gen…mazes-charting-1/
2012/10/15/mosaics-and-maze…design-to-pattern/
2013/05/06/mosaics-and-mazes-drawing-motifs/
2012/10/15/mosaics-and-maze…design-to-pattern/
2012/09/22/mosaic-and-maze-…-on-the-machines/

Single bed tuck and slip stitch fabrics 1

The main difference between the 2 stitch types is that in tuck stitch the strand of yarn on the non-selected needle is held in the hook of the needle forming a loop, while in slip stitch the strand of yarn bypasses the non-selected needles as the row is knit, forming floats between stitches Symbols commonly used for bothIn both instances the stitch on non-selected needles when the pattern begins (blue row in photo) is held in that needle hook, growing in length until that same needle is selected, and with the next row of knitting (red) one returns to the standard knit stitch formation.
Both distort the fabric, the tuck stitch widens and shortens it, while the slip stitch narrows and also shortens it. Both are capable of producing textured, interesting fabrics on only one or on both sides of the knit depending on the pattern’s design repeats. Which side is chosen as the public side is simply a matter of preference. In accessories and clothing, the interplay and “reversible” effects can provide added interest.
Because in tuck knitting the stitches are being held and gathered, more rows will be required to produce the desired length in pieces. Because the knit gets stretched sideways fewer stitches will be required to achieve the wanted width, making it suitable where larger garment pieces are planned. Looking at the stitch in a 2D diagram: A– loops are created for 2 rows, the original stitch is shown elongated. Each patterning needle hook now holds 3 yarn ends. B– the needle coming forward prior to the next pass whether by card reader selection or by hand, will knit on the next carriage pass to the opposite side. C– the originally held stitch as it might appear on the knit side

The group of loops as they knit together then forms small lumps/ bumps, or what I think of as “butterflies”.

The capacity of the needle hooks in terms of the number of loops they can hold and the quality and thickness of the yarn used place quick limitations of the number of rows one may use for tuck patterning. The Passap system tolerates many more such rows than the Japanese model machines, where the limit is often 4 rows. Slip-stitch is far more flexible in terms of applied “rules”.
Brother controls for patterning in any model are by the selection of cam buttons that offer directional arrows on the carriage Some of the options:    and not often used, but worth exploring, the use of opposing tuck and slip buttons at the same time. As with any knitting, for needle selection to occur the knit carriage (also known as KC) needs to engage the belt using the change knob set to KC. End needle selection or not depends on the goal fabric. If KC is in use but no cam buttons are pushed in, there will be needle selection, but the fabric produced will remain stocking stitch.
Any tuck cards may be used in the slip setting, but the reverse is not true.
Functions are in the directions of the arrows. For example, if a left button is pushed in, the next carriage pass will form loops or skipped stitches while traveling from right to left on the non preselected needles, and knit stitches on all needles on the return pass to the right, aside from any preselection being present. If both buttons are pushed in, the knit will form loops or skipped stitches with each carriage pass on non selected needles until those needle positions are pre-selected again, and then the stitches held in the hooks of the needles will knit with the next carriage pass.
It is possible to create the stitch structure on any machine, including manually by pulling selective needles out to hold for X number of rows. Motifs may be short or long, all over or isolated, can be arranged vertically, horizontally, diagonally, in diamond, basketweave, and plaid effects, may be combined with the use of stitches on the opposite bed, and with needles out of work (OOW) on either or both beds.
Punchcards are restricted to a maximum of 24 stitches or factors of 24 in the width of the repeats and require a minimum of 36 rows if they are to be used in continuous patterning. In electronics, the basic rules should be followed, but a single small repeat is enough to program, the size of large non-repetitive ones is limited only by machine memory and mode of download.
Both fabrics like to be weighted evenly, and several rows of waste yarn should be used at the start of the piece prior to testing patterns. Because it will be wide or narrow and short, that is a consideration if the plan is to combine several types of stitches in the same garment. Gauge swatches should be larger than usual.

Boiling things down to black and white: in both tuck and slip automatic patterning, selected needles produce knit stitches. Punchcard knitters are required to punch a hole for every knit stitch, leaving only areas that will be forming the tuck loops or skip stitch floats blank on the card. In a published chart for the stitch is used, black squares may be used to represent knit stitches and rows, white ones the tuck or slip stitch locations. It is up to the user to determine whether if using a published source, color reversing the repeat in electronics, or punching out the all-white areas as opposed to black is required. In single bed stitch formation, if one knits with two or more empty needles in work side by side, it will quickly become evident stitches will not form properly on those needles without additional steps being taken. This remains true in tuck knitting, but not in slip stitches. Though there are some exceptions, the usual rule is to have no more than one unit in any row without a punched hole or black square/pixel on either side of it. Punchcard pattern books are a great source of “safe” repeats. Electronic users need to isolate and draw a minimum of one repeat, which may be quite small. If duplicating a whole card with fewer unpunched holes than punched ones, only the white squares need to be drawn as black, and later the repeat is color reversed. Punchcard patterns usually have two rows of all punched holes at the top and bottom of the card that will rest on the first and last 2 rows of the design repeat respectively, allowing for the card to roll continuously in its reader. Cards also need a recommended minimum of 36 rows. Brother #1 mark on the right is 7 rows up from the bottom, while the card reader is reading design row one inside the machine, out of view. Cards from other KM manufacturers may be used, but the starting row may differ, as was also true back in mylar days. Punchcard machines produce the pattern as drawn on the purl side. Some electronic models or download programs vary, and may require the pattern to be flipped horizontally.

An easy way to start becoming familiar with the knit structure of stitches is to begin by working with “safe” design repeats, using a familiar yarn in a light color. Depending on the punchcard machine model year, the card on the left (1) was a standard Brother issue, the one on the right (2) not always. Both may be used to test all cam buttons and stitch types, card one tolerates elongation well, card 2 may meet some resistance with tuck stitch if the yarn is thicker than the needle hooks will contain easily. Converting the cards to black and white pixels: the small single repeats for each card are highlighted with a red border. Depending on the method for programming the electronic machine, however, the single repeat may have to be repeated horizontally to match the number of stitches to be used in the piece. The third repeat is a hybrid of the previous 2, the start of making what is published more personal Studying published sources makes it easier to design more personal repeats. Cards that are “safe to use” can get one started in examining the texture and developing an understanding of how stitches are formed. They are often composed of variations of either card 1 or card 2 with added black areas. Using punchcards supplied in the packs with respective machine models appropriately can easily be done Additional published cards are also easily found increasing the number of tucked rows and observing the rule of knit stitches on both sides of the single unpunched squares resulting in no preselection.  Below, some of the single repeats are outlined in red. With additional rows now tucking, the added insurance of having them knit off properly at regular intervals is achieved by all punched (or black squares) single rows, highlighted with orange squares on their left. The black border isolates the actual patterning rows in the designs. Again, the top and bottom pairs of all punched rows are not part of the overall design but are necessary for the punchcard machines to line up patterning for knitting a continuous design The blank vertical areas may be arranged moving across the repeat’s canvas in a variety of ways. In this chart the tuck symbol is evident, some of the knit stitches around each tuck series are highlighted at the bottom of the chart in green, the single electronic possible repeat is 4 sts by 12 rows What may be confusing when symbols and charts such as the above are encountered is that the very first row of the symbol actually rests on the spot where the knit stitch that is being held for the next 3 rows rests, so design row 1, 5, 9, 13, etc are actually all knitted. The punchcard minus the all punched rows at its top and bottom:  The factory-supplied blank cards may have arrows on the left, familiar in lace card designs. In the above case, the implied use is that the card start in the locked position on row 1 with the carriage on the right, preselecting to the left. If only a single color is to be used starting side does not matter. If regular color changes are recommended, more often than arrows dots, or color numbers are used in that column to indicate color change locations.  In Brother machines, the first preselection row may be made from either left to right or right to left, depending on the fabric being created. With the exception of dbj using the KRC button or patterns that expressly specify the starting side, most patterns using the color changer will need a start from the right. Here if that is done, color changes could occur every 4, 8, or 12 rows using 2 or even 3 color sequences.
There is another issue to note. Counting up design rows from the bottom the card is marked row 1 five rows up. This is a Studio punchcard. If using it on a Brother machine, the starting row would actually occur with the card locked on row 3, color change row markings if given, would have to be altered accordingly.
The distribution of tuck stitches can occur in groups, or more sparsely. The card on the right begins to break the rules with 2 needles tucking side by side for 3 rows. Those areas create floats akin to those created by slip stitches as the side-by-side loops drop off the needles in those areas rather than knitting off together. As areas of white become less balanced, punchcard knitters may find it easier to mark the tuck bars and punch all else, electronic knitters draw the white as black, and color reverse.

Few tuck stitches amidst lots of plain knitting are likely to not distort the fabric very much or produce a noticeable texture. The fabric will lie fairly flat, and approach a width proportionately closer to that of stocking stitch using the same yarn. The outlines can serve as markers for the introduction of additional hand techniques ie tying objects or beads in the center of the shapes after knitting and prior to felting in order to obtain surface bubbles of non felted stitches, or marking areas for duplicate-stitch or other embellishments.

In some instances, thread lace repeats can provide DIY inspiration. With the color reversed, the structure for possible tuck can be observed and determined if suitable. In the bottom right image, those white solid lines are the easiest edit, shown in progress With the basic structure recognized, weaving punchcards may be suitable, not all need be color reversed. Electronic repeats may also be used directly or adapted for use on punchcard machines, providing the repeat unit is a factor of or up to a maximum of 24 stitches in width, which translates to 2,4,6,8,12, and 24, and repeated to the recommended minimum of 36 rows in height. For tuck stitch, those narrow vertical bars surrounded by black squares are the common factor. The StitchWorld pattern book charts require only matching a usable width for use in punchcard models since the knit stitches are shown as black squares. Here is a random selection 253 translates easily to this, it would need to be punched twice 251 is a bit more problematic. Half the repeat is wider than 24 stitches. Here it is readjusted to 24 stitches, the height is 32 rows which may just barely squeak by punched only once the repeat is tiled to check proper alignments This repeat is from a Studio mylar sheet. It also may be used in punchcard machines after removing 2 columns, since only half the repeat is necessary, and it is 26 stitches in width. The color reverse option is necessary. In electronic machines, it is easily accomplished with a command or the flip of a switch/ push of a button. The white squares as given would produce loops on all the corresponding needles, with no stitch formation in those areas.  I chose to eliminate 2 columns from the blocks on the left. Tiling shows the amended repeat’s appearance, with the color reversed image for actual knitting to its the right. Repeats with a balanced number of black and white squares provide all-over textures in fairly balanced fabrics. As the number of black squares on a field of speckled tuck stitches grows, the knit shapes may actually poke out from the surface of the knit, since those areas are not gathered in the same way as their surroundings. Yarn properties and tension also have an effect.
Design with very few black vertical single stitch “bars” are commonly found in patterns published for electronics, often also too large for use on punchcard models. As with lace, where there are few black pixels on large fields of white, caution in trimming the image is necessary. Tiling once again helps one locate possible errors. An example of such an image tagged as being 42X62: tiled 42X62adjusting to avoid those 4 rows tucking consecutively, now 42X60Designing your own can begin with the choice of a template, such as this one, 24 stitches by 36 rows.  To begin with, I added a rectangle to the full template repeat on the left. To its right, the size of the rectangle then begins to be altered along with the addition of some all knit rows.  The center illustrates making certain the 4 stitch repeat aligns properly at the top and bottom of the new repeat. The test final repeat image is on the right. Working with a different shape, using copy and paste to place it,  adding a brick variation on the right, for punchcard full repeats of 24X40The matching electronic repeats for both, unless your download requires programming for the total number of needles in use:
Testing tuck stitch limits, breaking the side by side white square rule in all over patterning with moving blocks of 2 by 2 blank squares

A collection of previous posts
When more than one stitch tucks
Tuck stitch meets thread lace repeats and vice versa
Tuck lace trims (and fabrics) 2 
“Crochet” meets machine knitting techniques: tuck lace trims (and fabrics 1)
Tuck and slip color striping

For those who enjoy hand techniques/slip-stitch
A no longer “mystery pattern”
A hand-knit consult 

 

A quick review of plaiting on Brother machines

Over time plying yarns and the resulting color distribution comes into question, and often that leads to discussions on plaiting. One of my ancient swatches shows some variations in using 2 different colored fibers in three ways. It was tagged for display with myriad other assorted swatches on corkboards in my classroom, which were usually covered with a variety of illustrations of stitches and techniques covered in weekly classes and in response to recent trends. As always, effects vary dramatically depending on the choice of color and yarn fiber, and thickness. Here the 2 yarns were fed through separate tension masts, and knit together plaiting with yarns swapped in feeders for reversible striped effect yarns wound together with yarn twister and used as a “single strand”  Striping created by reversing yarn positions in plaiting feeder Using the thread lace setting and plaiting feeder working in every needle rib screenshot_23A mock plaiting effect may also be obtained without a special feeder by locking the pattern on any all blank row, the standard yarn feeder with A and B yarn placement, and the fair isle setting. Results are not as consistent in color distribution.
True plaiting usually requires a special feeder unless the specific model km has a built-in option. Two yarns are used in the plaiting feeder. They pass by the needles in sequence. One yarn always passes first, and the other follows. The standard feeder that normally carries the 2 colors when knitting fair isle is replaced, so this technique may be used in fabrics using cam button combinations other than fair isle and thread lace. Looking into the plaiting feeder from above you will see a central hole that traditionally carries the “main yarn”, and a crescent-shaped opening that carries the second yarn, which will trail behind as the carriage moves across the knitting bed. The second yarn appears on the purl side of the fabric.
On days when lurex combination scratchy yarns, and in any situation where the fiber used is unpleasant if touching the skin, a softer yarn may be used and brought to the interior side of the piece for comfort. I made a chenille sweater at one point with traditional cap sleeves that absolutely refused to knit to gauge. Adding matching wooly nylon and knitting it with the chenille solved the problem permanently and stabilized the knit. The contrasting color can provide a pleasant effect when fold-over collars, cuffs, etc. are part of the garment, and so on.
Brother plaiting feeders: The central hole holds the main yarn and the crescent-shaped hole behind it holds the second yarn. As the carriage moves across the row, the yarn in the crescent-shaped hole trails behind the other yarn and is always the second yarn picked up by the needles, showing on the purl side of your knit.
Be aware if considering purchasing one that other parts appear on eBay and other sale sites under this name, but are not the specific accessory. The following illustrations and directions for use are from Brother pubs easily found for download. For use on the main bed, images from the KnitKing 893 manual: If your sinker plate has rubber wheels, check them and move them to the proper position if needed. Canceling end needle selection applies in any situation and is used in tuck or slip stitch settings if there are needles out of work on the main bed for any reason to maintain proper patterning in needles in work. Electronic knitters have the KCII option in the change knob.
For use on the ribber:
Plaiting is sometimes used in bringing scratchy yarns such as lurex can be plaited with softer yarns so that the latter is worn closer to the body in the final garment.
More random, ancient swatches: stocking stitch using equal-weight yarns in a single bed tuck stitch

double bed every needle rib tuck stitch using the same pattern repeat a racked sample Shadow lace Pleated pattern When working on large pieces, the yarn in the front feeder may have a tendency to slip out. This is one option for helping to prevent that when the ribber is in use At one point I produce several circular sweaters using equal-weight yarns to obtain the reversible 2-color look. I had more than one feeder, so I actually used a dab of glue in the slit below the yellow arrow The drawback to doing that is that the yarn cannot then be easily slid in and out of its position but rather has to be dropped through the remaining hole using a double eye needle.

These illustrations are from a Brother manual for the 860 punchcard machine, an idea for working intarsia. I have not tested the method myself, am sharing it as a possibility for working the fabric without an accessory carriage An experimental double bed fabric using the plaiting feeder and thread lace setting double bed  2015/12/05/thread-lace-and-punchcard-knit-carriage-use-on-brother-910_2/

Some studio electronic patterns translated for use on Brother KMs

Each machine brand varied control box symbols over the years, and at times cam options also evolved. My long since Studio electronic experience was using the 560. The image below was from a pattern book for a later model. I first included them in a post on knitting with elastic Identifying stitch types in Japanese symbols in decoding patterns and charts can be confusing. Some large type illustrations extracted from punchcard pattern books may be found in my post on knit terms and translations The Studio cam settings The 580 operation manual explains those ducks and the function of point cams

The stitch type is fair isle, also indicated by the recommendation in English of colored yarns, one combined with elastic,  being held in 2 different feeders   
Adding  a border on the left side by positioning

Mirror and combing the 2 patterns into one, center on the needle bed, the left duck symbol on means the pattern knits as you see it, and it is mirrored as the ducks are pointing  25: the original provided was 60X24, here it is adjusted to a full size 76X24

27: the repeat provided was 60X48, here it is adjusted to a full size 120X48  28: the repeat provided was 60X84, here it is adjusted to a full size 120X84tiled X2 in height to check for proper alignment



To mesh or not to mesh 7, lace knitting tips

Early versions of the Brother Lace Carriage (LC) for machines such as the 830 could not control end needle selection. If any needles were selected for transfer to an end needle not in use in the piece, the LC still will attempt to move that stitch, and if no needle hook is there to accept it, the stitch will drop. Where an and needle has been selected on either or both edges, the option that remains for folks with no automatic way to cancel end needle selection is to push those needles back to B position by hand. Since selection is likely to not happen on every row, it may be an easy thing to forget as the length of the piece grows.
Later LC models include mechanisms like those seen in punchcard knit carriages that override the selection made by the patterning device on the end needles. There were also point cams, that help to change the spacing between vertical lengths of design repeats. For images of the Lace carriage and use of point cams please see posts 2017/10/05/lace-point-cams-…brother-machines ..
Electronic carriages are equipped with a magnet, and must always travel past the center needle 0 position center mark on the needle tape. Markings on factory punchcards give clues as to which carriage to use and for how many passes. They also may vary depending on the year the punchcards or mylars were issued. To review, here are some of the markings commonly found The graphic from the KH 860 punchcard model manual Illustration modified and adapted from multiple decades-old  Japanese magazines of fine lace
single complete transfers   Multiple transfers may be made either as a hand technique or expanded for use in electronics. Because single stitches are moved with each carriage pass, pattern repeats can become quite long, with few punched holes or black pixels Generally, it is best to use a smooth yarn that has some stretch and does not break easily. Because the yarn will be transferred to and from or in addition also be shared between needles in fine lace, some extra yarn may be needed for proper stitch formation. In overall meshes, it is best to start testing using a tension at least one whole number higher than when using the same yarn for stocking stitch.  Too loose a tension can result in dropped stitches or loops getting hung up on gate pegs, too tight and the stitches will not knit off properly or drop, or the yarn may even break. When eyelets are few, tension adjustments may not be needed.

Begin with waste yarn and ravel cord, then followed by casting on and knitting at least 2 rows before beginning to use the LC. The cast-on will need to stretch to accommodate the growth in width which increases with increasing numbers of eyelets. The same applies to the bind-off. One option for matching both is seen in this “Answer Lady”  video.

It is only when the knit carriage is operated that actual knitting takes place.
The movements of the lace carriage serve only to move or transfer stitches across the surface of the fabric. The card does not advance when the KC knits a row, so the movement of the card does not reflect the progress of actual knitting.

In most punchcard repeats, if when the row of transfers is completed there are two or more empty needles side by side, troubleshooting is required to solve the problem unless they are intentionally planned in the design, with deliberate adjustments to components of the overall pattern repeat.

The needles need to be in good condition, with latches that open and close smoothly and easily. Also, check for any bent gate pegs, and use a tool to even out the spacing between them if needed.
Error corrections need to be made to match the proper stitch formation.
As in any other knit, if tuck stitches occur in the same location and are not part of the planned fabric, it is likely the needle is damaged and needs to be replaced.
If a loop is sitting on top of a needle with a closed latch before knitting the following row, that stitch will drop. If it is noticed before knitting the row, the loop can be knit through the stitch manually while being mindful of what action that same stitch should take in the progression of the pattern.
The appearance of tuck loops, red rowTo form eyelets a loop is created on the needles emptied by the transfers on the first pass with the knit carriage to the left (red), the stitch on that needle is completed as the knit carriage returns to the right (cyan) If when trying to correct the direction of a transfer or a dropped stitch the transfer is not formed properly and the stitch in that location is knit manually the eyelet will be absent 

The traditional placement is for the LC (Lase Carriage) on the left, and the KC (knit carriage) on the right, but some patterns can work with their placement reversed or even swapped at regular intervals as knitting progresses.

Bringing needles out to E before the all-knit row may help avoid additional dropped stitches when there are multiple stitches on any needles.
Though knitting may proceed smoothly, checking the work frequently visually will make the rescue of problem areas possible as opposed to having to restart the project.
If test swatches are hard to knit, the problems will likely multiply when a larger group of needles is in use and the project should be put aside.

Because there are so few markings in lace, the lace card does not necessarily resemble the finished stitch appearance.
Needle pre-selection does not make as much sense as in other types of patterns. Where knit stitches occur in vertical stripes may also not be immediately evident. Needle selection on punchcard models is fixed, some shifting on the needle bed rather than centering may be required to have a specific repeat placement or a cleaner edge, which also matters in seaming.

There are definite top and bottom directions to lace, so in knitting scarves or sleeves that is a consideration. One solution is to knit 2 pieces in mirrored directions with many possibilities for methods to join them.
No top-down knitting on sleeves if you wish to match the body and it has been knit from the bottom up.

It is possible to use short rows combined with lace patterns, but any shapes created are likely to change visually, so planning is required unless those changes are deemed suitable. Traditional holding by changing the knit carriage setting may not be used. Needles to be put on hold need to be knit back to A position and brought back into work as needed. Ravel cord or any tightly twisted cotton may be used. If needles have a tendency to slide forward when holding large sections or at the hold starting side as the piece progresses, some tape may need to be placed in front of the needle butts on the metal bed to hold those needles in place. These illustrations of the process are from an early Brother machine manual Lace and holding effects may be produced by combining LC use with the knit carriage set to slip stitch and also selecting needles in pieces such as automated edgings or doilies. The design repeats are not interchangeable between punchcard and electronic models.
When two carriages in Brother punchcard machines first move in the same direction selecting needles, ie. the knit carriage moves from left to right, the LC follows it also moving from left to right, the card does not advance. The same needles are re-selected on the next pass, repeating the design row. On electronic machines, the mylar or memory/downloaded patterns are triggered by the magnet at the rear of the knit carriage to advance on every row. The designs need to be planned or adapted based on the type of machine.

As with any knitting, there are times when nothing seems to work for no good reason after intervals of smooth knitting and no other changes, and a break is best for both the operator and the machine.

The greater the number of eyelets in the pattern, the wider the finished knitting. Blocking in some form will usually be required to set the stitches, and may be required if the piece grows in length and narrows as it is worn or hung when stored.

Out of habit I usually leave weaving and tuck brushes in use for all my knitting, but particularly when creating textured stitches and lace.
Gauge swatches should be larger than usual, all in the pattern, and treated as the final piece will be in terms of pressing, blocking, washing, and allowed to rest before obtaining measurements for garment calculations.

When stitch symbols first appeared in Japanese publications they were represented as the stitch formation occurring on the knit side of the fabric, which could be confusing since in machine knitting we are looking at the purl side. Eventually, Nihon publications made the transition and other pubs followed. A comparison of hand-to-machine stitch symbols with illustrations and more information: 2013/07/21/hand-to-machine-symbols-5-lace/
For cross-brand use: 2019/02/23/revisiting-use-of-lace-patterns-studio-vs-brother-machines/

I have been blogging for years and sometimes return to topics after long absences. In terms of more information on lace design and some tips on translating hand-knitting instructions for machine knitting please see: 2013/07/23/from-hand-knit-lace-chart-to-punchcard-1/
2013/07/24/from-lace-chart-to-punchcard-2/
2013/07/26/from-lace-chart-…3-adding-stripes/
2013/07/27/from-lace-chart…-4-a-border-tale/
2013/07/29/from-lace-chart-to-punchcard-5-to-electronic/
2013/08/29/from-lace-chart-to-punchcard-6-to-electronic/

Transfer lace cards have very few black squares to avoid transcribing errors for punching holes or generating electronic repeats, work with a reproduction of the graph that makes it easy to view squares or pixel placements ie using Gimp, X800+.

Blank Brother cards are dotted in lines dividing the cards into 6X6 blocks.
Mark graph paper or software grids) if possible, in 6X6 blocks.
In ArahPaint the latter can be done by adjusting grid properties  

The Brother, Toyota, and Studio fashion lace punchcards may be used on all 3 brands as long as there are 2 blank rows after each transfer sequence. 
The first row on Brother is preselected from left to right and transferred from right to left, while on Toyota it is transferred from left to right. Brother and Toyota cards are interchangeable provided the repeat is mirrored vertically or knitting starts with and operates with the carriages on the opposite sides recommended by the alternate brand.
Studio knitting begins with 2 blank rows, Brother starts with a punched row and ends with 2 blank rows, the first preselection row on the cards with locked selection needs to be adjusted accordingly.
The Brother LC does not advance the row counter, only the KC does.
Stitches are transferred in the direction that the lace carriage is moving. In most cases, the LC preselects toward the KC and transfers when moving away from it. Brother and Toyota cards are marked with U-shaped arrows to identify when to knit with the knit carriage.
Studio simple lace cards where stitch transfers and knitting occur in the same carriage pass may also be used on Brother machines, but require special handling discussed in other posts.

One of many methods to deal with dropped stitches: secure them by going through them using a needle threaded with a ravel cord.
Unravel back to an all-knit row undoing lace transfers carefully, to the point where stitches were dropped, rehang the dropped stitches, and remove the ravel cord.
Roll back the card, mylar, or electronic row count to match the number of rows unraveled.
Unless the knitting carriage is also set to select needles, only the LC advances the design rows. I prefer to roll back cards or electronic counts after each row is unraveled.

A punchcard tale: after the chevron post, single-color sideways chevrons appealed to me. Two variations from a Brother Punchcard Volume  A the full 24 stitches wide repeat, half the required height for the punchcard user.
B  the single electronic repeat.
C  the single electronic repeat tiled X3, checking to see that pixel actually line up properly.
Punchcard markings of note:
A  design row 1
B mark for the first row visible on the exterior of the machine, the card reader is reading 7 rows down
C typical markings for the direction of the LC movement on that row, and for knit rowsThe two rows at the bottom of the card reflect the overlap when punchcard snaps are in use to keep the pattern continuous. Looking at it in more detail Column identification at the bottom of the chart:
A direction of the lace carriage, pixels, or punched holes preselected on that carriage pass
B direction of transfers; note there are extra blank rows where their direction is reversed indicated also by the change in the color of the arrows. Multiple rows in one direction only, happening here in a series of 5, will result in biased knitting. As bias is reversed, the zigzag shape begins to be created.
C  markings for 2 rows worked with the  knit carriage, the pattern does not advance on those rows on any machine
D  markings on factory punchcard
E  design rows
When working with electronics, the actions need to match those indicated on the factory design beginning with the row one punchcard marking on the right.
The width of the planned swatch or piece may be programmed for use with the single motif setting in img2track or the required default in Ayab. Adding a blank square at each end ensures the end needle will knit on every row, no pushing back needles by hand will be required. Changing fibers opens up a brand new world: this swatch (unblocked) is knit in a tightly twisted rayon, and edges also begin to create clearer shapes than that achieved by knitting the same design using wool. Spacing out the zigzags, another 24X30 repeat. This is the minimum repeat for electronic KMs as well, knit stitch spacing (white squares) can be planned to suit 

Once again, one must be aware of whether the lace repeat needs to be mirrored on the specific model machine. I initially forgot to do this on my 930, which results in an erroneous repeat if the lace carriage is operated from the left. Planning the placement on the needle bed controls the number of knit stitches on either side of the resulting mesh shape.  Today the rayon was having no part of knitting properly, this swatch is once again in wool. 

At one point I shared ideas for automating mesh patterns in lace edgings using the LC and the KC (knit carriage) set for slip stitch

Changing the above repeat for a zigzag border: in my first experiment, I tried keeping the number of eyelets in the zigzags across rows constant, did not like the visual “extra” line away from the edge, and was happier with my second try. This fabric would do better with a yarn that can be blocked to shape, the wool used here is a tad too thin. There will be some tendency on the part of the eyelets on the very edge to appear smaller as the edge stitches are stretched into shape. It appears I also have a needle that needs to be changed The transfers of the stitches by the LC while using the knit carriage set to slip in both directions to create the knit rows, will automatically create increases and decreases along the left edge. Due to this fact, there will be one less eyelet in each transferred row than the number of pixels/punched holes in its corresponding pattern row. The knit carriage in this instance preselects rows for the lace carriage, the lace carriage preselects all needles required on its way back to the left for the knit carriage to knit on its next pass.
This chart attempts to show the movements of the carriages and the location of stitches after they have been moved along with eyelet symbols in their locations after the transfers The pattern repeat on the left below is as I drew it and intended it, on the right, it is mirrored for use to knit it on my 930The first preselection row is from right to left, the knit is centered with 10 stitches on each side of 0. I canceled the end needle selection on both carriages. The first row is knit, when the KC reaches the left side, set it to slip in both directions. As it returns to the right it will knit a second row on all needles in work, and preselect for the first LC pass. Extension rails must be used as both carriages will lock onto the belt for pattern selection. At the start of the piece, as the LC moves from left to right it will transfer preselected needles to the right. On its return to the left, it preselects needles that will knit as the KC returns to action from the right. Each carriage in this design makes alternating pairs of passes.
When the top half of the pattern repeat is reached, the LC makes its pass to the right on a blank design row. As it does it preselects for the next row of transfers, which are made to the left as the LC returns to its home there (A). Though the Brother LC does not knit and transfer on the same row as the Studio one can, it can transfer and preselect for the next row of knitting (B). The above fact allows for planning transfers in both directions while still keeping the routine of 2 passes for each carriage to and from their original home. Based on that, here is another trim with eyelets in alternating directions along the side opposite the zigzag shape. The repeat is now adjusted to 22 stitches X 48 rows to accommodate the reversing eyelets arrangement. It is shown here mirrored for download to my 930. There is a blank square at the top right corner, the corresponding stitch will be cast on by the knit carriage on its move to the left and transferred automatically when there is a return to transfers at the bottom of the design repeat. The yarn used or the swatch is a 2/18 wool silk. There will be 2 stitches on each needle (A) at the very edge where stitches are transferred for decreases and look different than where the edge stitch is simply moved one needle to its left (B), leaving behind an empty needle. A parallel, similar difference is also noted at the inner edge of the zigzag shape. The sample is pictured turned 90 degrees counter-clockwise, and its bottom edge appears on the right Transfer lace on the Passap: the console will be used to select needles for hand transferring stitches. The technique will determine the number of plain rows between transfers. Use tech 137 for two rows between transfers. The pushers will set the corresponding black cells for transfers, they will stay in that position until the next set of transfers. Many tuck patterns may be used to make the selections, they are not designed to knit on adjacent needles, choose ones that have white columns for nonselected pushers 2 rows in height. Stitches are worked on the front bed. The front lock is set to N and the back lock to GX. Move selected pushers up so that the corresponding needles are easily identified, and use a tool to move stitches right or left. Move all stitches in the same direction, first across a row to the right, then across a row to the left to avoid biasing if the pattern is an all-over one, for borders all transfers in the same direction may work as well. Leave the needles in the work position, return the pushers to rest, and continue in the pattern.

To mesh or not to mesh 6: chevrons

While creating the test swatches for a version of single bed 3D scales using the lace carriage I was intrigued by the chevron effect that became more obvious with color changes The fabric was capable of changing considerably in look and width that could be encouraged to remain more permanent with blocking. There is a visible asymmetry, with one side of the chevron actually containing an extra eyelet. Still trying to retain the 24 stitches in width design constraint, I began to work with simply counting eyelet transfers matching in number, guessing rather than planning. Tiling the repeats can help get a sense of how things line up horizontally and vertically. Electronic repeats can be minimal unless one is programming the pattern as a single motif that includes edge knit stitches etc when downloading via cable to an electronic or using the Ayab interface. A and B continue to produce uneven numbers of eyelets on each half of the resulting “V” shapes. The greater the number of row repeats of eyelets in a single direction, the more the resulting bias. If asymmetry is the goal, then this may meet the need. I knit most of the swatches on 48 stitches, with more needles added on the right if needed to ensure the edge stitch will be a knit one. Larger shapes require wider tests. The photo is rotated to reduce its length on the page This effort produced uneven sides of the Vs, and the eyelets along one of the vertical center columns were not properly formed, resulting in an added knit stitch The added eyelets in pattern C produce an interesting change from a sort of V shape to more of a W, but the fabric is still unbalanced Back to the drawing board: a different mesh, with eyelets in alternating numbers, resulting in a  more balanced fabric. Here the charted repeat is shown X2, side by side. Different day, same yarns, both were having none of it. When knitting progresses in this manner, it’s a good time for the machine and its operator to practice social distancing.  The quality of the lines produced by the mesh was different and heavier than the one I was seeking, though the number of eyelets remained constant on both sides of the center stitches, alternating on the alternate pairs of design rows. Back to charting things out in Numbers: though the LC, usually (but not always) starts located on the left, preselects on its first pass to the right, and begins to transfer to the left on its second pass back to the left, in order to visualize the direction,  the repeat is mirrored. Cyan cells indicate actual transfers to the left, and magenta transfers to the right. This 24 stitch repeat shows where 2 transfers wind up on a single needle while an extra knit stitch is also formed in the blank vertical column, seen in the swatch above. In programming an electronic KM the black pixels alone with 2 blank rows above the second set of transfers is enough. I like to program repeats that are a bit larger, and usually will tile them as well, looking for any errors my eye might notice before any actual knitting Using electronics one may expand or reduce the number of stitches in the repeat to reach an estimated equal number of eyelets With any mesh, the number of knit rows may be varied between each pair of transfers. My swatch was knit using a 26 stitch repeat width The cast on used is a temporary one. In final pieces, the quality of any bind off and cast on should be tested as well to accommodate the changes in width lace fabrics may have, increasing the number of total eyelets exponentially. The knitting this time went smoothly. The eyelet count was as planned. That said, I was 6 stitches away from completing the bind off when the yarn simply ran away from me, and chose not to make any effort at rehanging the piece. In the top blue stripe, the number of knit rows between transfers was increased from 2 to 4, while in the top white stripe I alternated between 4 and 2 rows of knitting. Playing with such intervals between rows of transfers can produce interesting differences and perhaps a more static quality in the fabric after blocking the completed item. The knit carriage is set to N, so it has no effect on the advancement of the programmed lace pattern. The white yarn used here is a tightly twisted cotton knit at tension 9, the green a softly spun, slightly thinner rayon On a lighter background behind the swatch, 2 areas at the center are marked: on the left, there are extra knit stitches, which happened because the yarn had gotten caught on a gate peg affecting selection, and that had been missed.
With lace as with any textured knits, running a finger behind the knit along where the stitches meet the top needle bed periodically helps to find and troubleshoot the problem early.
On the right, there is a small diamond shape beginning to appear which is absent from the much crisper transfers and eyelets created by the cotton.
With these patterns, the number of rows in the striped sequences may be varied throughout the piece A repeat in this family of stitch repeats was used as a border in some of my shawls Exploring a smaller repeat, also 24 stitches wide The lace carriage makes 4 passes followed by 2 rows knit throughout
The white yarn used is the same cotton as in the previous sample, knit at tension 9, the chenille is rayon, 1450 yards per pound, the eyelet patterns are stable and distinct, Here 2 thin yarns are used, and the spacing between color changing is varied in height Another variation Adding more rows of plain knitting between lace transfers stabilizes the width of the fabric and reduces the number of transfer rows.
Here the first row after the planned number of transfers is knit using the white yarn, 4 rows in the contrast color follow it, and a single last row in white is knit before returning to transfers.
Dropped stitches do not run the way they might in other fabrics, and may not be noticed until after knit rows. Such errors here are marked with red dots.  As often can happen in machine knitting, on a different day, the same yarns, same tension, same operator, and stitches drop, get hung up on gatepegs, and perform other unwanted actions.
This test aimed for that “W” shape using the thinner yarns.
I downloaded an image that accounted for all needles in use for my swatch, so in the 930 using the isolation button on by default with img2track was OK.
Your machine may vary as to which side of the center the extra stitch will be placed when the total number of stitches in width is an odd one. If uncertain, plan the repeat for the next even number, in this case, 52, divide it evenly on each side, and either air knit to sort out selections before casting on or simply transfer that extra knit stitch over one as you begin to knit.
In a final piece, good notes will provide reminders for such small details The blue yarn refused to knit off properly, so the different added colors were tried to see if I fared any better using them.
My first swath was discarded, and the second one is shown.
The repeat is sound, the visible “errors” are the result of stitch formation issues. The swatch at first is shown stretched in length, its size could be set with blocking, and has a very different appearance when lightly touched with my now fiber burning iron On a different day, all other things being equal, the same needle locations resulted in easy success. I programmed for a 60 X 24 repeat, planning for different size V shapes. During knitting, these fabrics will appear to be producing straight color stripes It takes a while for the change to begin to be noticeable This was the result as the work came off the machine, relaxed, with no treatment of any sort the ribber is in place there are avid beliefs expressed by folks in terms of whether or not to bring the knitting to the front of the ribber, I am a between the beds’ advocate. Also, even with the ribber off my machines’ top beds have always been set up with ribber table clamps in place since having them flat simply never worked as well for me in any of my knit experiments. Taking the guesswork out of repeats, one may begin with or use published cards as they are, this is from a Japanese magazine,  the charted repeat on a grid marked in 6X6 blocks, typical of Brother blank punchcard the 24X56 png from Brother punchcard volume 5, click on the images for larger views  the charted repeat  the 24X40 png

the charted repeat  the 24X48 png A knit tested Pinterest find, a Studio lace pattern  For use on Brother, shift the 2 blank rows at the bottom of the chart to the top,
the LC makes four passes starting from the left, the KC follows with 2 passes, operating from the right throughout
the charted repeat
the 24X40 png the proof of concept, including a dropped stitch  Zig_zags are essentially chevrons rotated counterclockwise, I am including some here. The repeats for knitting them are quite different.
A one-color zig-zag from the Brother punchcard volume 5 book with a different approach could serve as trim or for knitting accessories, note the markings for the location of knit rows and varying numbers of LC carriage passes as typically seen in published lace cards. There are limitations in producible width. The stretch of the cast on and bind off and the fact they need to match as closely as possible while allowing the mesh to stretch sideways in blocking must be taken into consideration, as is the fact that every end needle selection will occur regularly and those selected end needles must be pushed back consistently.
Not all lace carriages have the option of canceling end needle selection, found in later models. Point cams could provide another alternative, I personally do not like to use them.
In this attempt, the cast-on followed knit rows in pattern, the manual end needle canceling was inconsistent at the sides, and LTBO (latch tool bind off) around single gate pegs was simply not stretchy enough. Here the cast on and bind off match very closely. I used the looser cast-on method described by the “answer lady” in the video, but I bound off around 2 gate pegs instead rather than wrapping the needles as shown in the video, a method often used on the Passap2021 visualizing the punchcard in an added way, using Numbers: transfers to the left occur with LC making 2 passes, the transfers to the right occur with the LC making 4 passes, and both sets are followed by the KC knitting for two rows the full punchcard 24X60 repeat  the 24X30 png  A new, 48 stitch test in the crisp, tightly twisted cotton knit at tension 9 produced a transfer texture that is more noticeable and clearly retaining the mesh grid.  A variation in the shape formation with a number of added knit rows in specific locations which are hard to decipher even in the original paper pub, where the suggestion is for 8 rows of knitting at punchcard rows marked 56 and 24. A personal choice can easily be made both as to the number of knit rows and their location(s). the charted repeat  the 24X56 png Spacing transfers so zig zags are actually created in knit stitches and transfers are made with the LC passes alternating for 2 rows, and then followed by 4 rows, with each set followed by 2 rows knit.   From a Brother magazine, a repeat moving toward a very different type of line, with an echo of the chevron movement  a more visible chart  the 24X36 png More information on striping options: a hand transfer lace variant 2014/03/27/striping-in-lace-fabrics-1/, and another using a stock punchcard 2013/07/26/from-lace-chart-to-punchcard-3-adding-stripes/A very different chevron in an advanced technique combining tuck stitches with lace and fine lace patterning