Over the years I have avoided ribber fabrics that involve hand manipulation of stitches in addition to patterning. Runaway stitches are hard to see and repair.
In these fabrics transfers are made by hand with multiple transfer tools. As stitches are moved, the last of the stitches transferred on the purl side (in this illustration 4 stitches), one will lie directly behind one of the stitches on the main bed (marked in red), sharing the same needle hook space. As the next row is knit, the needle emptied by the transfers picks up a loop. The following knit carriage pass will complete the stitch on the needle holding the loop, and the eyelet.
My recent posts reminded me of a repeat from an older Brother punchcard pattern book that combined lace transfers and fisherman rib. The original repeat is shown on the left, designed for use on punchcard machines. Stitch and tuck loop combination transfers are made every 4 rows, prior to knitting that row in the opposite direction. The machine is set for half fisherman rib. Tucking happens on top bed on all needles in one direction only, the ribber remains set to knit both ways throughout.If all transfers originate on the same spot, a vertical line of eyelets is producedCan plaiting give me 2 colors the “easy” way?
If transfers move to the right or the left, an arc will be created Aiming for the punchcard pattern book inspiration I began at first by marking up the needle tape with water soluble pen to help track repeat segmentsAfter a short trial swatch I sought to automate needle selection to serve as a guide for moving stitches across the needle bedThe main bed is set to tuck in both directions. White cells tuck, black cells knit. Rows in Brother preselect for the next row with each pass of the carriage, so on even number design rows as the carriage moves to the opposite side, all needles will form tuck loops on the main bed. The next row will be preselected, with some needles now back in B rather than D position. With an appropriate transfer tool, move the stitches on the non selected needles to the adjacent selected needle to their right after pushing it back to B position. After each transfer push all worked needles and their stitches as well as he now empty needle to E position. As the carriage returns to the opposite side an all knit row will be completed. Several tension adjustments may be needed to insure loops do not get hung up on gate pegs as stitches move across the bed, while still being loose enough to knit off properly.
The charts below reveal planning for a 2 color repeat with mirroring of the original above. Seeking new geometry, the repeat “inspiration” is mirrored horizontally. The final repeat is on far right. The knit carriage is set to tuck in both directions throughout. On white cell design rows the main bed tucks, the ribber is set to knit. On mostly or all black cell rows the main bed will be knitting, the ribber is set to tuck. In this fabric the transfers are made on knit stitches created on the previous row prior to moving the carriage back to the opposite side. All transferred stitches and the empty needle are brought out to E position prior to moving the carriage to the opposite side, will be creating the second all knit main bed row. Transfers are made every 8 rows, with pairs of transfers being made toward each other, no longer all in the same direction as in the single color sampleThe central repeat is color reversed to achieve the final repeat on the above right in order to produce those transfers on knit rows. Final row count needs to be a multiple of 4 rows in height. Here is a 2 widths 36 stitch X 32 row repeat chart The extra line seen occurs when one forgets to reset the ribber to tuck, and stitches are all knit on a “wrong row”. It is by coincidence that they seem to occur in the same spot in the repeat
On the bottom half of the swatch below the difference is the result from when one carriage knits every row on both beds, requiring a change on the knit carriage as well, canceling its tuck setting with every other color changeThe last repeat may be flipped vertically as well. It then needs to be edited so those white squares land on the row after an all knit row, not below it. The final repeat on the right is 36 stitches wide by 64 high. There are still 8 rows between transfers. On the left is the first resulting chart, on the right the amended chart so selection for transfers occurs on the proper row. the germ of one last idea, the repeat 14 stitches wide by 96 high, max transfer seven stitches (odd #)playing with ideas a bit more, max transfer six stitches (even#)
This was my attempt to shoot for a recurring shape and planning on having transfers land on a like color, the repeat is 8 stitches in width, 112 rows height. Six stitches are the max number transferred. More would give a wider curve, the final repeat would be exponentially longerits reverse side :
When the main bed tucks in both directions with one color, knits in both directions with the other:I did try to eliminate those lace holes. On the right of the swatch as shown below I threaded a needle and attempted to close the eyelets with stitches, getting closer to the line one might get in a hand knit. On the left I hooked up loops to fill the empty needles. The latter changes the intersecting lines completely.
picking up only the white yarn from the tuck loop below the transfer bringing filled in needle back to E position prior to knitting next row the difference in intersecting lines at the outer edge of my intended shape