A lace “shell” want to be, a few ways

I recently saw a semi circular HK shawl pattern that used graduated lace shell motif bands, and went hunting for a possible such repeat with the intent of subsequently knitting it on the machine. Taking into consideration the chart lenght required if using the lace carriage, I began with a “small” hand knit possible repeat

the text (Intwined)

pictured below is a mylar repeat worked out for use with the lace carriage with 2 programming options: A, B. Notations in this instance were made using a free mac program (for my the first time), Skitch, which allows one to work with screenshots and basic image-editing tools all in one place. The middle column of numbers indicate the number of passes required for the lace carriage for each repeat prior to pairs of rows of plain knitting. The transfers are made all in one direction, so the spacing between each set of transfers and knit rows is different from the traditional 2 rows of blanks. I find it easier to have multiple blank rows before selections for transfers as a place to pause, check my stitches, and have clearer starts if knitting needs to be unravelled; this repeat takes that into consideration

option A was knit with a ladder, NOOW set up:

the resulting swatch in acrylic yarn, steamed, fairly straight edges

option B eliminates the ladders, a ridge is created by the transfers highlighting the “shell shape”. The sample clearly illustrates the issue with lace fabrics where transfers are all in one direction: note the resulting bias, which could be a problem or a design feature, depending on  one’s perspective. It is particularly noticeable in the area of the color change. The top yarn is a rayon, the ridge created by the transfers flattened with pressing but is still in evidence, the occasional noticeable problems are operator errors (and laziness in changing bent needles), not pattern ones.

shortening the repeat: I found this one a bit more confusing to follow, black horizontal marks on right edge of mylar are a visual cue to rows on which knitting needs to occur; note there are no occurrences of 2 consecutive blank rows, only singles

the fabric is identical, with the same problems in terms of biasing

taking out the swing, moving in 2 directions, and back to a hand technique: the black squares indicate groups of stitches that will be moved to create lace holes. In the boottom segment selected needles are transferred to the right, lace holes will move in a curve, transfers double up on the same needle location on the bed. In the top segment, beginning with the doubled up stitch from the last transfer to right, direction of transfers is reversed, moving toward left, and always beginning with the same needle position. Markings on mylar on the far right indicate direction in which the stitches are transferred. This repeat is 7 stitches wide by 12 rows in height, could be adjusted to suit. Adjustable transfer tools make the work progress faster.

the corresponding swatch, without blocking, much more “straight”

4/11

a mylar repeat for use with lace carriage, 910

in the image on left the repeat is hi-lighted by the green border; in the one on the right there are visual cues  for operations. The vertical lines indicate which side of the bed the lace carriage needs to be placed for the next group of transfers, the horizontal lines mark the end of the transfer sequence, when a single row of knit occurs. Respective carriages need to be taken off the bed after most passes to allow use of the opposing carriage and maintain proper direction of moves, a different sort of “hand technique”. Below is a swatch, the red spot is a poorly corrected dropped stitch.

the technique is manageable for experienced knitters, this was my second try at a hurried repeat (weight adjustments and dropped stitches on first) and photo as I get ready to travel to the opposite coast.

Leave a Reply

Your email address will not be published.