DAK lace module 2, template use, other software

I am taking a break from lace, the two posts so far on using the module reflect my own experiences outside the program’s environment. The latter will continue to be the focus of my future posts when exploring the use of the software, with testing specifically aimed at adapting or using any of the Stitch designer features and output on Brother knitting machines.

Almost a decade ago I had a temporary leaf lace obsession, and it appears to have resurfaced. This pattern was offered in a Japanese machine knitting magazine, with no accompanying MK repeat. When transferring stitches by hand it is possible to move multiple stitches within a single row as well as to move stitches in opposite directions within the same row, making the published repeat executable When automating the repeat edits are possible and very easy using the lace module, these first drafts were created in Numbers,  I have to admit the first time I tried to knit both the associated png, mirrored and not, I experienced patterning errors. Whether due to operator fatigue, static, or any other possible cause, on a different day both designs knit successfully, and my appreciation of the module is growing steadily. The results for this, a complex shape, are quick and awesome when compared to the amount of time it would take to draft the pattern outside the program.
The design process, beginning with Dak: in this instance, the lace tool was used with what I will call the drag and stop method, initially on the fabric texture using the smart symbols.  At any time during the drawing process, several image view options are available and may be changed back and forth by deselecting features in this menuAn stp was created, the template is marked 74 rows in height, filled in as the stp was generated, right side facing Numbers and Gimp reduced the template to a png 14 stitches wide by 52 rows long, needed to be mirrored using the number one button on the 930 for successful knitting, matches the original illustration. Dak makes slight modifications very easy. The untested brick repeat, 28X104, developed using Arah followed by its png changing that central shape
The amended design drawn in repeat in dak visualizing the knit, The print preview template: and converted for use on Brother electronics using Numbers and Gimp the resulting png, 14 stitches by 68 rows, also knit using the number one button on the 930 the proof of concept swatch The brick repeat developed in Arah, now 28 stitches by 136 rows,  its png comparing the initial three knit results for differences, the samples were knit using the same yarn at the same tension A test for the second brick repeat, here visualizing results with a screengrab of the stp. The test swatch is for a single repeat width, the initial yarn used ran out, hence the color change, the second yarn was thinner and broke, but there is enough to get a sense as to how the overall alignment of the knit shapes will appear, including that horizontal chevron between the shifting leaves. The png required mirroring when used on the 930. I became curious about reverse engineering from punchcard to an stp file: my first choice was of a “straightforward” but slow to knit pattern, 34 LC passes are made before any knitting rows follow.  Ayab users have access to a huge library of knit-ready pngs, this was one, it also happens to be 24 stitches wide, so suitable for punchcard users. The published repeat as given is shown on the left, mirrored for use on my 930, left and right transfers are then marked in red and green respectively to check transfer placements. The right half of the image is then copied and dropped down a single row reaching the necessary configuration for Dak, allowing for the stp to be created. deselecting yarn colors in Dak provides a clearer view of transfers the 24X36 original png:  A proof of concept swatch: the yarn was too thin for the many transfers and broke, so on the right, there are fewer stitches than initially planned. At the bottom there is a single instance of 2 rows knit after all the transfers, there are 6 rows knit after each transfer series in the remainder of the swatch. Color changes could be added in multiple places to interact with the wavy shapes The template for the stp as first attempted is something quite different but would work if the pairs of blank rows between pairs of transfers are eliminated over its length except at the very top
it would need to be drawn eliminating the pairs of blank rows between transfers to match the original repeat because all those carriage passes are consecutive. Drafts with no blank rows between alternating transfers are not accepted by the program and ruled out in any template preview as well. The complexity of working with a “simple” repeat: over the years I accumulated a notebook full of copies from Japanese magazine pages with what I believed to offer interesting potential, this repeat happened to be one. The markings for the knit rows on the right, and the two blank rows at the bottom identify it as suitable for Studio punchcard machines, and it would appear to be easy to translate for knitting on Brother thanks to those 2 blank rows between transfer cell markings. Developing the Brother repeat in Numbers for beginning with transfers to the left. The repeat is recognizable as a mesh variant, more information for mesh design repeats may be found in the post, the lace carriage is used for 2 passes, and then for 4 passes alternately the repeat on the right was created in Gimp.  The 12X18 png was mirrored for use on my 930, some cables were added. A 1X1 crossing in the thin yarn used in the sample would have been nearly invisible. The placement, in this case, is at the top of the full repeat, after the first knit row before returning to transfers for design row 1, an easy way to track the hand technique. The 2X2 crossing used might need help with definition and placement in a wider vertical knit strip Creating the stp: the size of the png was used to create the image file, which required cropping, in Dak this would be the menu language after activating the proper tools. the stp size is 12X16, The template generated for a Brother punchcard machine illustrates the problems and some of the confusion if the template repeat is used for actual knitting, especially on the punchcard machines. Drawing the eyelet and dragging the mouse one cell to the left is the intuitive way to draw for transfers to the left. The symbols appear to be right-side facing by default and if they are in turn mirrored by the program prior to saving, when the templates are generated, the intent for use of the design would match. The numbers on the left are in the punchcard template, adjusted by cropping the two extra rows in the Brother electronic template by the software, do not reflect the actual design row numbers. The starting row is wrong for the Brother lace carriage operation from the left to produce the first row transfers to the left in actual knitting. As far as determining sequences for knit row placement, that is left up to the punchcard knitter’s experimentation. The minimum repeat for a punchcard to roll continuously is 36 rows, that fact needs to be considered if punching cards. The repeat shift for the first transfers to happen toward the left is illustrated on the right.  As initially given, with the lace carriage starting on the left, the first transfer row would be to the right. In many cases, this may not matter, but in this instance, where the knit rows happen after 2 or 4 LC passes respectively, the template offers another instance of the fact that the knitter using it needs to have previous understanding and experience in creating the particular stitch type. This version does not have an accompanying swatch. Analyzing the electronic template for interactive knitting: it is correct in marking rows for LC operation from the left with the first transfer row made to the right, matching the above chart.  The LC operation is continuous Eliminating the rows marked with red would yield a workable punchcard repeat, with loss of the cues for the proper sequence for LC passes.
In this case, it would be best to redraw the adjusted electronic repeat prior to punching any holes.
Getting that first row to transfer to the left can be achieved by mirroring the first stp draft, using the second selection,  the resulting electronic template yields the repeat with transfers in the direction intended, as seen in the proof of concept swatch and its repeat For good measure, the repeat is also drawn as stitches and produced the punchcard template with a first blank row identical to that generated when using symbols Using the pencil tool to draw the transfers differently resulted in a series of error alerts, so not an option.

For Brother knitters mirroring the self-drawn stp and altering the electronic template may be the way to go. Also, be alert that Brother and Toyota punchcard knitters cannot knit interactively because the interactive knit rows present in the mylars cannot be present in the punchcards, a fact that is acknowledged by the software company nearing the end of the content on the lace module. No mention is made of the fact that for successful knitting the knit carriage on Brother needs to be set to KCI or II for the pattern to advance properly during interactive knitting and that those rows need to be omitted if entering the pattern on a mylar sheet or are using the repeat for download to a machine outside the DAK environment and you prefer not to have the knit carriage selecting needles as well as the lace carriage.
In summary, the information on the tool presented in the manual for the module:

 

DAK lace module 1, template use, other software

Working with lace designs: lace poses interesting challenges in machine knitting. The name is associated with a variety of fabrics, but transfer lace is the specific topic for the moment.
Reminders with respect to transfer lace knitting:
in Studio simple lace the transfers and knitting occur for each row of the design  with each pass of the carriage
transfer lace patterns in Studio km begin with 2 blank rows and end with markings for transfers
Brother transfer lace begins with needle selection markings for transfers and ends with two blank rows. The knit carriage does not advance patterning rows unless the change knob is used to select needles as well.
Hand knitting charts typically illustrate the knit side, while in machine knitting the knitter is working looking at the purl side, so if charting for duplicating the same transfers, the HK pattern requires mirroring
The Brother lace carriages usually operate from the left, and Toyota from the right
Some download programs automatically flip patterns horizontally, great if you are working with texts in most cases, but a consideration if you wish to control the direction of other stitch-type formations, and lace patterns drawn in the program may need to be flipped as well in order to knit properly on Brother with the lace carriage operating from the left side
When I design, out of habit, I try if possible to work with repeats suitable for punchcard machines as well.

Facebook members who participate in machine knitting forums have access to the information generously shared by members. Sheila West published a video on drawing lace repeats on a DAK knit stitch symbols ground as opposed to the more traditional charting using lace symbols on a blank design grid, and there is also an associated downloadable PDF.

Softbyte support has been responsive and at times helpful in communicating with me, and reviewing issues I encountered.

I prefer to download manuals for software when the option is available making it possible to review them when not running the program. In my enthusiasm to do so, it appears I downloaded the manual version offered in the last tab, which happens to be for section 5, graphic design studio, which by default was not helpful in using the lace module. When I initially looked for help, the information that became available was for the wrong module, 5. In using the program on Oct 21 I have not been able to replicate that issue when opening other modules.
When the program is first installed, the manuals are listed in a series of tabs, ending with that for section 5. For Stitch Designer, choose section 3, the manual appears and a way to download the associated PDF is also provided.  There are 5 help files and 5 manual files. They don’t interact at all and work completely independently from each other, can be opened from DesignaKnit or from a file browser window. 
Interactive choices using the help menu: Contents  Manual: When manuals are chosen in any module, there is an option offered to download the associated pdf by clicking on the arrow key specific page numbers based on the index may be entered and jumped to.
Tutorials: Update: The lace module is an extremely attractive solution for speeding up the lace design process whether from published charts or DIY. The left mouse button is used to draw as usual, but the right mouse button is used when drawing shared transfers in fine lace on Brother, or simple lace in Studio km.
My initial experiment and observations:
each time the program opens a new session, the normal drawing pattern appears. Selecting the Lace tool icon in the left menu bar will change the default palette to include the necessary symbols. In working with stitch symbols this is the range of available, It is possible to show any repeat tiled as well. For lace the number of stitches and rows should be close to those required by the design, its overall size may be trimmed if needed when the design is completed.
The left mouse is used to apply the symbols, I have read the right mouse has a different function and is used to draw shared stitches in Brother fine lace or in filling in simple lace designs for Studio machine models.
To select the lace mode simply click on the small icon on the left menu bar, a grey border on its left and the upper edge will indicate it is active, the palette and cursor will change. The designer may enter patterns on this view as well, but I prefer to work with symbols
It is best to begin testing with a small repeat when exploring new techniques, find his format easier to use than drawing on “stitches”. There are several options for the canvas ground color, the default is in blue. As a first step, saved as an stp, Dak opened my saved file as pictured in this view.  Wrong approach: The pencil tool must be active to continue to draw, left mouse click to place symbol, right mouse click to erase, clicking on any symbol in any one row will call up pertinent information on its location in the repeat
Is there another way to draw symbols while working on a lace design file?  use the lace tool, using the pencil tool with each type of lace symbol is not recommendedDAK row numbers do not refer to design rows, they reference row counts as would be seen in any row counter registering carriage passes
Other views for the repeat: as yarn colors and as stitch symbol palette If a symbol is missing from the drawing, the program alerts the knitter to the error.  Here there are no eyelets represented.  There was no warning for the error in the last row of the test stp, where in the last row two stitches were being moved in opposite directions on the same row. If the content is considered accurate, this window will appear, the safe button will be highlighted, click OK I found this lack of warning for some errors in later designs as well, it is a topic under review by the developer. When choosing machine knitting options lace is not offered as one,  fair isle is used To print a template for use on another machine the stp file may not be used for copying to clipboard and converting to stitches in another program. In the print menu, saves are possible for templates akin to graph paper references for working further on both electronic and punchcard machines. For the electronic printout, the choice of the machine appears to need to be set to 950i wrong side facing is chosen for the purl side view.  Stitch pattern print previews, using default settings for layout:
the stitch pattern picture was basically a numbered graph paper image with no content, pattern text, and not particularly useful
other previews:
the suggested electronic repeat: The templates for electronic models have 4 rows between transfer sequences rather than 2 as is usual for Brother. They are needed for interactive knitting where the KC passes are represented onscreen as well, Dak knitters likely set the knit carriage change knob to select needles on KCI or KCII.
For punchcard end-use, change the machine setting for print preview to Brother/Knitking standard punchcard, and click ok. When you choose Fair Isle, DAK will reverse your design and that may mean that there will be two eyelets side by side or double stitches transferring because the transfers are being made in the wrong direction. DAK will invert the pattern from left to right if it has the knit method Fair Isle or Wrong Facing. If it has the Right Facing method it won’t be flipped. The knitter still needs to sort out whether right-side facing or wrong-side facing makes any difference in their particular brand machine outside the Dak environment. The need for added mirroring for correct transfers depends on the download program ie Ayab mirrors any programmed image automatically, or the specific brand machine ie punchcard vs. electronics may behave differently. An easy test is to use the repeat on a small swatch, if side by side empty needles appear on the needle bed, the pattern needs to be reversed. Any lace designs suitable for a punchcard machine, when they are knit on my 930 require mirroring unless the png is saved mirrored horizontally in the paint program used to create it prior to download to the machine.  the repeat:
The numbers on the left correspond to carriage passes, not design rows. While the electronic template represents the interactive kitting repeat and differentiates between rows for use of the LC and KC, leaving the KC rows unlabeled, that distinction is not made for punchcards in any way, and marked numbers are not in sequence. Published Brother punchcards contain additional symbol columns for added guidance on settings and carriage passes.
Assuming the knitter knows whether the programmed repeat will need to be mirrored or not to knit properly on their specific model knitting machine, the 24-stitch punchcard version should work on both model machines.
The numbering on this punchcard template skips 2 numbers for knit rows between transfer repeat segments as seen in the first sample, and in this later repeat, the number sequence interruptions are marked in red. In punching long cards especially, renumbering the whole would make the repeat easier to follow. This stp pattern was also created using the pencil tool in combination with symbols. In the print preview, there were 2 errors in the Dak printouts, the three blank rows rather than 2 in the outlined section between transfers, and transfers in 2 different directions occurring on the same row with the same carriage pass. I have no way to test whether the same issue would occur in interactive knitting using my own stp file. My repeat, drawn in Numbers on the right, is numbered in design rows. When choosing print, the global options allow for editing items out such as company name, date, and format by simply clicking in the associated boxes choices can also be made on how to represent stitch units If the plan is to create a punchcard template and the repeat is too wide, an error message appears Paper size measurements in page set up other than US letter

other associated menu choices It is possible to save the template as a bmp of the full image. The size of the file is shown to the right of the pixel count number settings for the clipboard or bmp file, which will vary in proportion to the stitch and row count. Click on the floppy disk icon to save.  My hack for reducing the onscreen size of the templates for screengrabs I could trace in a spreadsheet was to use a 600 mm setting for punchcards, and 350mm for electronics instead of selecting a paper size. The actual printing to scale is not an issue at the moment, but it is possible to print templates to full size, involving a bit of trial and error with individual printer settings and math.
The proof of concept swatch, knit on a Brother 930 KM, mirroring the image was not necessary, the dropped stitch was a surprise design feature when the swatch was very lightly pressed its.png Regrouping after a review of my pencil tool repeat by Softbyte support: the original stp has an error in it on row 11 where yours truly had eyelets being created by having the same stitches moved in opposite directions in the same row. It is interesting that I was able to save the stp without receiving an error message as seen in this instance below when the pattern was being redrawn with transfer symbols on the wrong row, The amended final repeat,   in turn, produced a correct punchcard template using the print preview As an additional lace template test, I repeated the process on a portion of an stp file shared generously shared by a DAK FB group knitter along with photos of a completed, lovely lace sweater using it.  The results are shown sideways because of the repeat length. The 950i template places four rows at the end of each lace sequence, while as seen in the published repeat of a different lace beside it, there should only be 2. The carriage passes made by the KC in traditional lace knitting though they advance the row counter, do not advance the pattern unless it is selecting needles as well, ie in trims that combine lace with the slip stitch setting. Exceptions to the 2 blank rows rule occur when the lace shape reverses direction such as in zig-zags, or when plain knit or pattern rows are planned deliberately to mix and interact with the lace design. Please see the previous post for more on lace charting and explanations for those in-between added pairs of rows variations. Brother knitters outside the DAK environment may use the templates as they are, but set the knit carriage for pattern selection as well on KCI or KCII.

This is another lace stp pattern built using the pencil tool method. The charted symbol diagram was published in a Japanese magazine along with its published punchcard design. There is an intentional extra row at the bottom of the repeat, making it “wrong” if the intended use is on a Brother machine as a test for how the template might handle it in the print preview. Template previews were created using the setting for Brother standard punchcard bulky or Brother 950iFacilitating correct DIY designs, in addition to the warnings if there are missing symbols or any other problems with the design and their respective row locations, the module provides a warning about that extra row, explaining that if the generated pattern is used as is, the bottom row should be moved up or the LC should begin pattern selection from the right. The electronic preview continues to have a series of 4 blank rows between transfer segments. The punchcard template has 2 blank rows between each transfer segment and matches the published pattern with a 3-row exception toward the top of the card. The renderings below begin with the DAK punchcard template on the left with its confused numbering, the extra empty row at the bottom of the repeat was eliminated. The overall repeat is mirrored. It is followed by the published pattern associated with the chart, pixels are then marked for left and right transfers, followed by my amended final repeat, which when knit on the 930 required mirroringLace tool use instructions begin on page 299 of the third module user manual, Stitch designer. From the manual: when the Lace tool is clicked, lace patterns can be created by using the LMB or RMB to click and hold on the stitch cell where the eyelet needs to be, after which the mouse can be dragged in the required transfer direction and let go on the stitch that needs the corresponding decrease. Intermediate transfer stitches will be added automatically where appropriate. If the button is clicked and the stitch pattern has a method that is incompatible with lace, the warning that is shown on the right will be displayed. The Wrong side facing texture is probably the most natural choice because this is generally considered the normal method of knitting on Japanese knitting machines. Sections of Lace and Fair Isle may be used in the same stitch pattern and either Fair Isle or Wrong side facing texture are good choices when working with lace patterns.
If either of the Right / Wrong side facing texture methods is used, and there is only one color per row, it can be transparent or opaque. If there are more colors per row, the opaque color is seen as the real yarn color, while the transparent colors are regarded for memo purposes.
The lace smart symbols have an associated ‘texture’ which is used to see a representation of the finished knitting. This representation is not entirely accurate as decreases have to be shown on a single stitch cell instead of over the two adjacent cells that are affected. However, the bias of the transferred stitches, as well as the lace eyelets are well represented to give a good idea of how the stitch pattern will look when knitted.
The symbols that are specifically used for machine lace knitting are displayed with a light green background in the Symbols Organizer. The same repeat as above was redrawn, with that extra bottom row eliminated  The associated template preview for the punchcard nearly matched the one that was obtained with the pencil tool chart, but had some differences: the previous image was mirrored although no dak settings were changed. As in all punchcard template numbering, the knit row numbers are skipped in the sequence on the left, so they will not match design row numbers, and the small flower motif is placed differently  This sample was knit using the pattern drawn with the pencil tool, pre mirrored for use on the 930. The convention for lace designs is that they must contain an even number of rows, the one on the right is 47 rows, knits properly, but is suitable only for a border. Here a pair of extra rows were knit, followed by design row 1A wider swatchWhen attempting to use this repeat for a continuous one, unless the total number of rows is an even number, the second repeat will reverse the direction of the transfers, resulting in mispatterning and multiple side-by-side empty needles. Changing the total repeat to 48 rows by adding another blank row places all transfers properly. The 12X48 png
Adding extra knit rows at the top of the repeat ie. 6 or 8 may make the alignment of the 2 shapes to each other more pleasant.
The challenges in DIY lace patterning are many.
The same design was redrawn using only the lace tools. The appearance was the same as in the previous draft, the print preview template was two rows shorter, 46 rows long, and no longer mirrored, with the flower shape slightly lower than in the other sample, it is shown here alongside the Gimp png draft for exporting the png used in the samples. Knit in continuous pattern with 6 knit rows added before restarting with pattern row 1 with LC on the left A half drop repeat is also possible. To achieve this test of a repeat drawn in a paint program, I  knit 2 rows after the last “flower” eyelet and had to flip the repeat horizontally before continuing for the top half of the repeat, producing a very different look.  There is a transfer error in the knit swatch on the right where I “repaired” a dropped stitch. Edits would be needed if one is determined to make this pattern automated as a continuous design.
Options for manipulating stitch designs in dak appear to be the following. Interested in developing an automated brick repeat for the above design, this was produced outside dak as a guideline for entering the symbols in stitch designer Using the lace tool, the areas marked in red highlight cells where wrong symbols for stitches in those areas were initially created using the lace tool. Use of the pencil tool was necessary to replace the incorrect symbols. The stp was saved with no error warning, but the resulting repeat was identical to my self-drawn one with the top half of the bricks knitting in the wrong direction resulting in mispatterning and double eyelets.
Saved stp files may be opened and further edited using either or both the lace tool and the pencil tool.
With respect to the use of the pencil tool, from the manual: “It is possible to place lace symbols onto the stitch pattern manually by activating the Pencil tool, then selecting and placing each symbol where required. However, this can easily lead to errors as the placement of each symbol needs to be well understood.
The “Check once for color changes etc.” option in the dialog can be clicked after which dak will either display “No errors found” or it will display error messages such as the ones shown here.
Clicking “OK” returns the program to the workspace where errors may be corrected. DesignaKnit does not mark the pattern when these errors occur. After correcting, “Check” can be run again to ensure all errors have been eliminated. Using the Lace tool to create lace will greatly diminish the chance of errors.”
I have encountered instances where no error messages were received, the stp was saved successfully for supposed knitting, have been told there are edits and future updates underway for both version 8 and version 9.
the right mouse button is used when drawing fine lace designs, which is not part of my present explorations
In theory, the Lace tool will:
insert the eyelet, transfer and decrease symbols in the direction of the drawing
insert a double decrease symbol where the lace transfers occur  onto a single stitch from opposite directions
prevent the placement of eyelets on adjacent stitches within the same row
warn of invalid lace sequences when saving or checking the pattern
remove the eyelet, its matching decreases, and any transfers  in that sequence with a single click of an eyelet symbol with either the right or left mouse buttons
Brother knitters need to keep this in mind when using the lace pattern in the dark environment, the knit carriage will need to be selecting needles as well. If using the templates to generate patterns for use with other download programs, the traditional use for Brother lace and punchcard machines is to have the knit carriage not selecting needles. To use the given template for the electronic in that manner, 2 out of the four blank rows between each series of transfers may be eliminated and the pattern from the electronic template if within the punchcard repeat restrictions, may be used on punchcards as well. Having plain knit rows not selecting, in my experience, makes for easier unraveling and returning to an all-knit row when rows need to be unraveled to correct errors or knitting falls off the machine.
All punchcard templates keep the number sequencing for the electronic repeats, removing the extra interactive knitting rows and their numbers from the electronic template, reducing the repeat to design rows, which results in the numbering sequence on the left not matching the actual total number of rows in the repeat, making it ineffective if following those numbers when punching cards.
Making things work: the dak repeat for the brick arrangement, there are single blank rows before selection for the shifted pattern begins,  my edit in a spreadsheet, the yellow cells mark rows missing in order to get the lace carriage back to the left side before the next pair of all knit rows.  The full repeat was trimmed to 12 stitches in width, and 48 rows in height, opened in ArahPaint, and drawn in brick repeat, shifting the top by 6 cells. The green lines mark the original single blank rows followed by the pairs of added blank rows with no markings, the needed corrections the Arah image was saved as a png, knit on my 930 using img2 track, and mirroring
The proof of concept swatch for the now fully automated pattern   When a repeat is sorted out it is easily modified to create other variations. Here the small flower shape is eliminated, as well as the first transfer sequence to produce stacking triangular shapes. The repeat is now 10 stitches wide by 28 rows high, so suitable only for electronics.  The swatch was lightly pressed, prior to that, there was actually an interesting 3D quality which can be common to many unblocked lace patterns. If the knitter wants to retain that quality, the quandary is then encountered as to whether one also may want the piece to lie flat, particularly at the sides and the top.
The above repeat was mirrored for use on the 930. With lace as with other fabrics, the repeat may be tiled and programmed to the width of your knitting, here for use in a 30-stitch swatch. While in other fabrics a plain knit border may be added by placing black cell vertical cells on each side of the wide repeats, this cannot be done in lace, because those selected needles will attempt to transfer multiple needles in a single pass, which is not possible. Brother offers edge-stitch plastic cams to help with that.  The cast-on in this instance is a provisional one, with several rows knit prior to beginning the use of the lace carriage. 

Revisiting lace repeats, symbols, and charting

Lace knitting for many introduces knitting with 2 carriages for the first time. The lace carriage advances the cards, mylars, or programmed pixels in a design row with each pass. In other stitch types the knit carriage, once it is set to select needles ie using the change knob on KC, in punchcard machines,

or KCI for end needle selection, KCII for no end needle selection in electronic models, also advances the pattern a row with each pass. The advances happen in Brother machines when any carriage locks onto the belt and moves past the center 0 marking as it travels from one side of the stitches in work and past them to the other.
Electronic and punchcard published lace patterns may be used in both machines as long as when punchcard models are in use, the pattern repeat is a maximum of 24 stitches wide or a factor of 24, such as 2, 4, 6, 8, or 12 stitches in width for each complete repeat segment. This exchange is possible because the knit carriage does not advance the pattern repeat in both models, it is left set for performing plain knitting, with the change knob set to N-L.
When the knit carriage(s) is (are) also set to produce patterning, extra caution needs to be taken with the alternate carriage being off the needle bed so both carriages do not lock onto the belt, which will then be anchored on one side, and pulled toward that spot from the opposite side, possibly causing it to break. One instance in transfer lace knitting when the knit carriage also selects needles is in knitting automated edgings.
Many other stitch types may be knit with 2 knit carriages selecting needles from opposite sides. It is one way to have frequent color changes without using a color changer, tensions and cam button settings can also be different. On an electronic machine, each pass of each carriage advances the design by one row. Here patterns stop being interchangeable. With 2 carriages selecting needles, when a punchcard machine is used, as the alternate carriage makes its first pass from the opposite side, the card does not advance, so the previous preselection is repeated. To use a published repeat for either machine on the other, the repeat needs to be adjusted.
If one of the two knit carriages is left set to N-L, it will not advance the pattern, providing an easy way to add plain knit rows between patterned ones without having to alter cam button settings or the programmed repeat. In transfer lace knitting, there are many considerations when attempting to represent carriage movements for both carriages in a single chart when the knit carriage is not also selecting in pattern, but simply knitting and not advancing the repeat. The first illustrations use the machine knit repeat developed from a hand-knit pattern inspiration many a year ago 2013/12/05/lace-mesh-motif-charting_-mac-numbers.
Since then software versions, computers, operating systems, and my use of them have evolved and changed. I have edited the post with additional information, inked in a different color.
Experimenting with DAK has brought me back to thinking about the issues in charting lace fabrics in particular.
Lace knitting tips including card and electronic markings for transfers and knit rows 
Mesh grounds: 2017/07/29/to-mesh-or-not-to-mesh-5-design-repeats/
Info on lace meshes for both grounds and patterns 2021/05/12/to-mesh-or-not-to-mesh-8-more-numbers-meet-gimp/
Two of the posts on using Studio repeats on Brother brands:
2019/02/23/revisiting-use-of-lace-patterns-studio-vs-brother-machines/
A Studio lace card with single blank rows between transfer segments knit on a 910
No symbols are used in this chart, generated using the DAK template print preview for knitting with a Brother model 950 i. The red cells represent transfers to the left with LC operating from the left, the green cells represent transfers to the right, and the grey cells indicate knit stitch rows.
The knit rows in most lace unless the pattern is combining KC needle selection for slip, tuck, FI, or weaving do not advance the pattern rows.
LC actions are marked on the left, the KC ones on the right
The LC makes 4 passes:
1: preselects for transfers to the left as it moves to the right
2: transfers to the left as it returns to the left,
3: transfers to the right as it moves to the right, there is no preselection for the next row
4: moves back to the left with no transfers or preselection
The KC follows with 2 knit rows. In the chart for this pattern, representing only the repeat, there is no room to indicate KC passes on the left-hand column
The appearance of the chart or template changes if 2 empty rows are added to represent the KC passes. It may help one understand what is happening but in Brother machines, 2 of the 4 blank rows here would need to be eliminated for the pattern to knit properly.
Making distinctions in the programming for the repeat depends on its use. If one is using DAK for interactive knitting, by necessity those extra rows are needed to allow for the view onscreen of the rows involved in the plain knitting with the knit carriage. I would assume knitters are instructed to set the knit carriage to KCI or KCII, each carriage will advance the knitting for a row with each pass, extension rails are a necessity since each carriage needs to engage the belt for patterning. Using the same repeat for drawing on a mylar sheet or for download outside the DAK environment the greyed-out 2 extra rows can be eliminated by marking squares or entering pixels and punching holes (depending on repeat width), and the remaining repeat should work.
If the image is being downloaded as is to an electronic, it may be used as given, with the knit carriage selecting needles and the cam button set to KC I or II.
Because printing template previews are produced using the fair isle option, the design will be mirrored, a necessity in some electronic models, but for punchcard knitting the same repeat with the extra rows removed, if accurate overall should be usable as-is. The numbering for the punchcard machine sequences however reflects the subtraction of the extra rows in the electronic template, the provided numbers then have skips in the sequences and do not match the actual design row numbers useful when a card is being punched.
Electronic carriages are equipped with a magnet, and must always travel past the center needle 0 position center mark on the needle tape. Markings on brand-specific published punchcards give clues as to which carriage to use and for how many passes. They also may vary depending on the year the punchcards or mylars were issued. To review, here are some of the markings commonly found
Lace knitting on punchcard machines a symbol summary:   There are many differences in transfer lace design: design transfer segments may vary considerably in the number of lace passes and transfers between each pair, or more in some instances, of knit rows. In the pattern below, only 2 rows of knitting are completed after 20 lace carriage passes, the bottom half is repeated X times, and the top half X times, adding even more complexity. Depending on the knitting machine model, the pattern may also need to be mirrored to knit accurately. Published punchcard books offer patterns with potential errors usually sorted out. Both punchcard machines and electronics scan the card or mylar inside the machines, several rows down below what is visible to the knitter at eye level on the exterior of the card or mylar slots, so markings on both need to be made accordingly. This is a fact that needs to be considered with cable downloads of the same patterns if entering memos for knit rows. In the case of punchcards, Brother reads 7 rows down, Studio 5. In fabrics other than transfer lace adjusting for the brand is straightforward ie to knit fair isle, tuck, or slip pattern if using a Studio company-supplied punchcard repeat, simply start the Studio card on row 3. If punching your own, design rows match, and if the blank card is marked for Brother, the numbering is accurate by default. Brother transfer lace cards begin with pattern selection, Studio brand with 2 knit rows. In this repeat, a mesh repeat is created first moving to the left, then to the right, the 2 knit rows follow 2 LC passes for transfers to the left, and 4 LC passes for transfers to the right. Brother row one marking is underlined with a blue line, Studio with red A Studio repeat adjusted for use on Brother also illustrates that the number of knit rows is only two, the LC passes can vary in number between knit rows. Here LC passes are marked with outlines around pertinent row numbers on the right   Brother vs Studio: extra knit rows in Brother are not physically left as blank rows in cards, the rows for KC are still 2 blank ones, while in Studio cards there is a blank row for each knit row in the pattern. Both these samples have a 6-knit row sequence. Because Studio begins with 2 blank rows, in the repeat on the right only 4 rows are left blank at the top of the repeat. Adjusting for extra knit rows, Studio to Brother These samples are from Brother punchcard volume 4:
single blank rows between transfer segments varying numbers of blank rows between repeat segments multiple rows of knitting (8) marked aside a single pair of blank rows Some electronic examples using the 2-row spacing between transfer segments: this is a page directly from the Stitchworld electronic pattern book a pattern published on a full Brother mylar sheet this is from a studio mylar, the same holds true in terms of the number of empty rows between transfers, that is the reason why most transfer lace patterns unless they are designed as studio simple lace where transfers are made with each carriage pass, patterns may be exchanged between both brands, the only difference being studio starts with 2 blank rows, ends with transfer markings, Brother starts with transfer markings, ends with 2 blank rows.
Electronic repeats are interchangeable after taking that into account, but not mylar sheets between machines, the respective brand mylar readers differ in the number of rows below eye level where the electronic readers scan the design, and the set or starting line will be in a different spot. 

Transfer lace may also be combined with other stitch types, each with its own considerations as in these instances both types of machines have the KC selecting needles as well. The punchcard published patterns need to be adjusted for use on electronic models. As already mentioned, punchcards do not advance with the first pass of the alternate carriage from the opposite side, while electronic models advance a row with each pass of both carriages:
adding KC slip stitch selection for creating ruffles and doilies
tuck stitch
weaving 1, weaving 2
fair isle

The lace module in Dak in theory will do the work for the knitter once the pattern is entered as symbols. Eyelets will be represented in single rows, a shorthand version of the previous samples. Reviewing how the transfers would appear on the knit and the purl side respectively. The LC can move only one needle at a time, so when multiple needles need to move to place the eyelets properly, the options are to use a hand tool to perform the moves or to develop a pattern with multiple transfers in each segment of the final repeat. The full repeats are often very long.
Approaches for developing DIY design repeats:
2013/07/23/from-hand-knit-lace-chart-to-punchcard-1/
2013/07/24/from-lace-chart-to-punchcard-2/

 

My DAK explorations 1

WORK IN PROGRESS

Resources for users or those curious about the program are offered below. There are 5 help files and 5 manual files. They don’t interact at all and work completely independently from each other, can be opened from DesignaKnit or from a file browser window, are not available until the program is purchased and installed, each may be downloaded as a PDF. DesignaKnit Professional contains 5 modules:
Standard Garment Styling has built-in sweater patterns that may be adjusted to custom measurements and gauges
Original Pattern Drafting: allows for using a pattern designed in garment styling to custom features such as knitting the design sideways or making pieced such as the front and back different lengths
Stitch designer is a paint program. A grid may be created to match the stitch gauge for a sense of aspect ratio of the design in the finished piece. When the type of knitting for the project is selected, warnings as to possible errors in any rows provided
Interactive Knitting: with the proper cable connected to the computer and the knitting machine the design is followed row by row, voice prompts may be activated so as to receive warnings when to change colors as well as counters for the number of rows between shaping ie increases and decreases while knitting sleeves
Graphics Studio: convert graphics to stitch designs, including color separations for DBJ, color reductions, scaling for large non-repetitive designs
When the program is installed and opened the manuals are found listed after using Help 
in a series of tabs, ending with that for section 5. There are 5 help files and 5 manual files. They don’t interact at all and work completely independently from each other, can be opened from DesignaKnit or from a file browser window.
Online references:
a quick summary of version 9 upgrade features
https://softbyte.co.uk/DK9UpgradeForms/DK9_upgrade_features_F.pdf
videos DesignaKnit9 graphic studio
https://softbyte.co.uk/dk9englishvideotutorials.htm
the DAK Facebook group
https://www.facebook.com/groups/523785160964950
members of the group have access to teaching material shared by Sheila West https://www.facebook.com/groups/523785160964950/user/1164753159
Youtube tutorials for DesignaKnit 8
https://www.youtube.com/c/Knittitude/videos?view=0&sort=dd&shelf_id=0
a search for DesignaKnit9 tutorial yields mixed results, including many for version 8
https://www.youtube.com/results?search_query=designaknit+9+tutorials
Graphic design studio search https://www.youtube.com/results search_query=designaknit+graphic+design+studio
offered courses at knititnow, search https://www.knititnow.com/Courses/#
login required as well as fees

Brother magazines for a while published accompanying pat files for DAK, they can be found http://machineknittingetc.com/catalogsearch/result/?order=date&dir=desc&q=DAK+files+Brother
also for Studio http://machineknittingetc.com/catalogsearch/result/?order=date&dir=desc&q=Dak+files+for+silver+reed
and Passap http://machineknittingetc.com/catalogsearch/result/?order=date&dir=desc&q=Dak+files+for+passap

I am a complete novice at the use of this program, tend to start learning new tools by comparing them with what I am familiar with, which in my case are spreadsheets and other paint programs. I have decades of playing with changing file formats depending on end-use. My questions on aspects of the program’s use are not intended as criticism, they are born of curiosity and the attempt to explore a new tool.
I am using Dak on a PC, at the moment my blog posts are created exclusively on my Mac. There is much that is fluid in addition to learning the software.

These are the formats that can be opened, converted to stitch patterns using Graphics Studio Stitch Designer, or opened as a background image in Original Pattern Drafting and used for tracing a garment piece: BMP, GIF, ICO, JPG, PCX, PNG, TGA, TIF, WMF, P?M. There is no export option for saving the repeat images in stitch design file formats for use in other than the native program. Passap CUT files are completely excluded.
I lean towards looking for workarounds to accomplish what I want if the task is not native to the program I am using.
One way to achieve conversion for DAK file formats for use as a png or bmp download with other cables and software is to isolate and select the repeat unit, copy it to clipboard, paste in a paint program, export as png or other desired formats There is a handy option in Dak when thumbnails is chosen from the image menu, one can browse through saved folders containing compatible file-formats including the images in those Brother magazine downloads. The small preview will identify the specific file size. When you left-click on your choice, it will appear enlarged at the bottom left of the view window, it has been moved from its corner in my screengrab, left-click OK on the enlarged image, it will open in the program window. Minimize the size until no further reduction is allowed by using the magnifying glass or the scroll function in the mouse. This is a different operation from scaling the original to a different size. The save-as option for the image offered at that point are:
For choices emulating export in other paint programs, right-click on the image, choose copy, open a paint program (Arahpaint is my favorite at this moment), and from its image it menu choose paste. Using Arah’s color exchange, the image may then be converted to black and white for 2-color work and is saved in a format usable with other software and in other machines. Here the image has been pasted in Gimp using the same process, but if the image needs to then be reduced to BW, Arah is the easier and predictable tool to use.
Activating the working palette, referred to as yarn colors: from the manual It is possible to achieve color exchange easily in Dak as well. Most operations appear to rely on an understanding of its symbols and what might be considered a language one must learn in order to use the program effectively. By activating the view yarn button palette, the items that may be viewed and changed are:
A: represents left mouse click on that color
B: represents a right mouse click on that color
C: click will swap A color to B color
D: needle hook alone represents non selected needle, pusher, or simply color depending on the machine model
E: color worked on patterning needle ie contrast in fair isle, knit stitches in tuck or slip setting It is useful to establish working history using the same design motif. In the first image, left-click on red, the from color, right-click on white, the to color, click on the double arrow to make and apply the change
The process is repeated with left-click on blue, right-click on black, and on double arrow. White squares appear in the final color choice boxes in the bottom image
The print dialogue allows for saving patterns as bmps. One is walked through the following steps with a series of windows. To save the repeat as bmp
choices may then be made about file name and the location for the save, If there are no “short” needles in the image being processed as in the last screengrab above, there will be an error message onscreen, pointing out problems in the numbers of colors present in rows ie more than 2 for FI.  This is fixed by clicking on either the “needles” of one of the two active colors in the yarn palette to make one color the ground, the other the contrast. The results from this process for printable bmp files are shown below, not for a bmp that may be used to knit the pattern on an electronic machine using a different download method. Here the resulting stitch pattern picture is shown in color reverse as well.  Using other print options: for this repeat, the color change page is blank since the fabric is being knit as a 2-color fair isle, without added color changes  Printing pattern text will do exactly that in longhand form, for each stitch and each row of the repeat 

Dak is the only program I know of for home use that allows for visualization of the knit design with approximations of knit stitches, seen here in both the BW and the original color version of the above FI design, shown as knit stitches on the public side. The image needs to be a minimum size for the appearance of the details as is true in most paint programs for grid views.   At this time I am continuing to knit on my machines with punchcards and using Ayab, or img2track on my electronics, have no immediate plans to change that, hence my interest in using DAK software features while keeping in mind the possibility of using the final repeats on other machine models.

The information on using the stitch designer lace module originally written here has been moved to its own post along with new content, updates, and corrections.